Multi-Function RC model Light Control Board Low Voltage Tracking Alarm
Left and right turn， brake linkage indicating lights， low voltage alarm， missing alarm. Suitable for car models， ship models， model ships， all standard universal remote control receiver.

Description:

1. The lighting control flight flying lights lit LED， can be used to fly decorative lights， front headlight searchlight.

Cornering lamp: the receiver !#!amp!*!quot;aileron \/ direction!#!amp!*!quot; channel linkage， for left and right turn indicator.

Brake light: With receiver !#!amp!*!quot;lift \/ throttle!#!amp!*!quot; channel linkage， for brakes， reverse directions.

Note: Players can use Strobe， color lights， etc. used in different occasions.

2. The low pressure alarm when the detected voltage is lower than the preset value (7 ~ 15V adjustable) when that all light is blinking， also issued B ~ B ~ alarm sounds. Avoid over discharge caused damage.

3. runaway alarm， look for an opportunity alarm control panel within 30 seconds when the input signal is detected unchanged， namely to start sound and light alarms. This function can be used after the crash runaway alarm or fall easy search by voice， lighting model. Dual high-power meters outside buzzer alarm can still be heard.


- Weight: 5g (without wire)

- Size: 34 !#!amp!*!times; 25 !#!amp!*!times; 12 mm

- Input: 5 ~ 15V \/ 2s ~ 4s

- Output: 5 ~ 15V


Note 1: The output voltage and external input voltage is the same， when the input is 7V when， LED1 ~ LED4 enable the use of the output is 7V. When the input is 12V， the output is 12V.

Such as the need for an external supply power， you can take 5V 5V and GND connected to the interface directly from the receiver.



Note 2: Be sure to distinguish between positive and negative voltage， reverse polarity or a short circuit may lead to burnout， and is not covered under warranty.

Package includes:
1x Light Controller Low Voltage Tracking Alarm( 2 versions )