Live and Studio Recordings
Need a mic for your drum overheads, high-hat and acoustic guitar for live and studio recordings ?
Audio-Technica Pro 37 at a Glance:
Versatile professional mic for studio or live sound
The Pro 37 offers excellent performance and value in a condenser mic. It gives you great reproduction of acoustic guitars - both in the studio and onstage - as well as pro-quality pickup in overhead drums situations or on acoustic pianos. Plus, the Pro 37 functions well as a vocal mic, both for solo performance and recording choirs.
Wide frequency response and dynamic range, plus high SPL capacity
With a frequency response of 30Hz-15kHz, the Pro 37 can capture extended low frequencies as well as airy highs from any source you use it on. A low-mass condenser element provides superb transient response for clean, tight lows. Ins maximum input SPL of 141dB means the Pro 37 can stand up to close miking vocals or even amplified instruments, while its 112dB dynamic range gives you plenty of room for dynamically diverse performances.
Operates on 11 - 52 volts phantom power for compatibility with inexpensive mixers
Many inexpensive mixers offer inconsistent phantom power output. The Pro 37 doesn't care! It can operate on phantom power voltages ranging from 11 to 52 volts DC, so you can use it with confidence even on an unfamiliar house mixer. The Pro 37 is also built for years of use, with a gold-plated XLR connector for corrosion-resistant contacts. Its low profile also makes the Pro 37 easy to place and inconspicuous onstage.
Top Features:
| ELEMENT: | Fixed-charge back plate, permanently polarized condenser |
| POLAR PATTERN: | Cardioid |
| FREQUENCY RESPONSE: | 30-15,000 Hz |
| OPEN CIRCUIT SENSITIVITY: | -42 dB (7.9 mV) re 1V at 1 Pa |
| IMPEDANCE: | 200 ohms |
| MAXIMUM INPUT SOUND LEVEL: | 141 dB SPL, 1 kHz at 1% T.H.D. |
| DYNAMIC RANGE (typical): | 112 dB, 1 kHz at Max SPL |
| SIGNAL-TO-NOISE RATIO: | 65 dB, 1 kHz at 1 Pa |
| PHANTOM POWER REQUIREMENTS: | 11-52V DC, 2 mA typical |
| WEIGHT: | 1.7 oz (49 g) |
| DIMENSIONS: | 3.9" (99.0 mm) long, 0.83" (21.0 mm) maximum body diameter |
| OUTPUT CONNECTOR: | Integral 3-pin XLRM-type |