?????

Content: repair sheet * 2 "round"， a special glue

 

Friendly reminder: General inflatable products in ordinary patch (free glue patch films)， peel off stickers， although convenient， but only temporarily solve the problem， you want to permanently repaired， only with special repair glue， generally 502 instant glue and adhesives are not repaired， it will cause the material aging. So please select special repair kit.

 

[Product name] Inflatable special glue

 

[Ingredients] acrylate adhesive glue

 

Glue stick [degrees] 5000 (Pa · s)

 

 

[Object] using PVC Inflatable products， such as inflatable， inflatable sofa， inflatable boats， etc.

 

This is a special glue PVC inflatable products， due to strong adhesion， use with caution! After use， the best sets of the opening with plastic film (such as plastic wrap in the refrigerator) and then tighten the lid to prevent the natural glue dry quickly.

How to repair a damaged inflatable products?

  A: teach you repair inflatable products

A， repair needle:

   If your product does not accidentally inflatable or wooden needle puncture of a needle or small， is the most easily repaired:

   1， after the inflatable products cover gas nozzle deflated to reduce the gas flow in the product;

   2， glue the patch package removed at the eye of a needle drop of glue on the line;

   3. If the needle is large， then take a toothpick， glue with a toothpick tip dipped point， it painted into the eye of a needle breakage， and then glue the eye of a needle mouth painted on it;

   4， repair is completed， four hours after the inflatable.

B， repair scratched mouth or scorch the mouth:

   If you are not careful inflatable products or very hot knife cut a big hole broken， please do not panic， in the following order， you can make good:

   1， after the inflatable products cover gas nozzle deflated to reduce the gas flow in the product;

   2， in the repair kit to find a patch material， cut a piece， to be sufficient to cover the broken seam;

   3， the destruction of the glue applied， the pressure on the patch， the patch with plastic side seam glued;

   4， applying pressure to ensure that there is no gap rubber surface， with a smooth， heavy objects to be pressed firmly;

   5， eight hours after the inflatable， repair is completed.

C， suede patch:

   1. Carefully clean the repair area;

   2. After drying， remove the patch cut well， cover the destruction of the surface， allowing a little more around;

   3， in the patch and damaged surface coated with glue， glue the patch side seam glued to ensure complete sealing;

   4， with a smooth， heavy objects to be pressed firmly;

 

   5， with heavy compression， then inflation pressure to 24 hours after the repair is completed.