Description :
| Model | Hantek6082BE | Hantek6052BE | Hantek6022BE | SainSmartDDS120 | SainSmartDDS140 |
| Channel | 2 Channels | ||||
| Bandwidth | 80MHz | 50MHz | 20MHz | 20MHz | 40MHz |
| Input Impedance | 1MΩ 25pF | ||||
| Max. Sample rate | 250MSa/s | 150MSa/s | 48MSa/s | 50MSa/s | 200MSa/s |
| Coupling | DC | ||||
| Vertical resolution | 8Bit | 8Bit | 8Bit | ||
| Gain range | 10mV-5V, 9Steps | ±5V, ±50V, ±500V, | ±5V, ±50V, ±500V, | ||
| DC accuracy | ±3% | ±3% | ±3% | ||
| Timebase range | 4ns-1h, 38 Steps | ||||
| Vertical adjustable | Yes | ||||
| Input protection | Diode clamping | ||||
| X-Y | Yes | ||||
| EXT. input | Yes | No | No | No | |
| Trigger Mode | Auto, Normal and Single | ||||
| Trigger Slope | +/- | ||||
| Trigger level adjustable | Yes | ||||
| Trigger Type | Rising edge, falling edge | ||||
| Trigger Source | CH1, CH2, EXT | CH1, CH2 | |||
| Pre/Post trigger | 0-100% | ||||
| Buffer size | 10K-64KB/Channel | 1M | |||
| Sampling selection | Yes | ||||
| Waveform Display | port/line, waveform average, persistence, intensity | ||||
| Network | Open/Close | ||||
| Vertical mode | CH1, CH2, Dual, ADD | ||||
| Cursor measurement | Yes | ||||
| Math | FFT, addition, subtraction, multiplication, division. | ||||
| Cursor | Frequency, Voltage | ||||
| Accessories | S/W CD, probes, manual, USB cord | ||||









