Item Descriptions:

led bulb sensor

Since there are inconveniences such as disappearance if there are moving objects in the sensitivity range of the sensor, I think that attention is required in the installation location.

toilet

I will not recommend it to such a place.

There is a possibility that the radar light bulb is erroneously operated due to the space being too narrow.

Installation in the toilet

LUXON

Human sensor light bulb (ASIN:

B077XYM3DL) is recommended.

When the power switch is turned on, the warm-up mode is entered, it lights for about 60 seconds and goes out.

After that, it will be in the standby state (goes off) as a sensor mode unless you sense the movement of a person.

Please use the appliance of the base E26, with the led lamp facing horizontally and open downward.

Sensor may not work properly if you use it other than sideways or downward.

(Sensors may not respond to appliances to be installed in the position where the light bulb is recessed even with open type appliances facing downward.)

When it is installed in the near place, only one will respond.

As for the installation of multiple lights, when one lights up, it will light as it will be light in the other light / dark judgment and will not light.

However, if you install more than one, it will not function well due to radio interference.

(Please secure a distance of 8 meters or more.)

Comparison with infrared sensor products: Microwave sensor change light sensing distance is farther, more sensitive, sensitive angle is big, there is no blind spot, pierces glass or thin wood.

Depending on the magnitude of electricity, it penetrates walls of different thickness and is not affected by environment, temperature, dust and so on.

Radar sensor light is an ideal product to replace infrared sensor light, acousto-optic sensor light.

Sensor light Product specification:

Led power consumption of led bulb: 7 w

Light bulb color temperature: 2700k

led light color: light bulb color

Total luminous flux: 700 LM

Sensor light sensing range: approx. 120 °

Bulb Body Size: 60 mm * 60 mm * 110 mm

led bulb base: E 26

Sensor light detection range: diameter 4 to 6 m, height 1.7 to 2.5 m

General color rendering index: ≥ 80

Lighting time of human sensor: about 30s

Material: Aluminum, Polycarbonate

led Bulb substrate material: Aluminum substrate is adopted and high heat dissipation properties make it super long life and excellent in energy saving.

Features:

• Specifications: LED bulb sensor light human detection sensor light bulb led power consumption: 7 W total luminous flux: 700 lm fluorescent lamp bulb type base: E26 LED color temperature: light bulb color 2700 K
• It is an LED light bulb with built-in human sensor.
• Existing lighting equipment will change quickly to light with human sensor just by changing the light bulb.
• When you sense a person in the dark, it lights automatically automatically, and when it ceases to go off it automatically turns off in about 30 seconds.
• It is an eco-friendly design that does not light up when it is bright.
• LUXON led bulb e26, technology features: radar detection, overload protection, short circuit protection, overtemperature protection.
• Human sensor Sensing distance: Approximately 4-6 m, Recommended loading angle: Landscape.
• When a person enters the detection range of the microwave radar sensor lamp, the microwave probing gas works and lights up.
• Automatically identifies day and night.
• It is also active in night lights and security lights for entrance lights, gate lights, pouch lights, garden lights, etc.

Product information:

Shipping Weight: 68 g

Package Dimensions: 6.60 x 6.71 x 12.09 cm