Usage:
<br />We have 2 methods to use the machine ,first method(hand piece model),not use the foot pedal ,just plug the hand piece ,turn on the power switch ,and then the machine move . Adjust the speed Knob of the grinding head within a reasonable range.
<br />If we want to use the foot pedal, we need to switch the power button to "OFF" first (the power light will go out), then connect the pedal, and step on it to make the grinding pen spin (Pedal Mode).Adjust the speed Knob of the grinding head within a reasonable range.
<br />
<br />
<br />
<br />
<br />Specifications:
<br />Voltage: 220V or 110V /60Hz
<br />Power output: 15W
<br />Hand piece part
<br />Rotation: 25,000 rpm
<br />Sanding Bands: 80"/100"/120"
<br />
<br />
<br />Steps:
<br />1.Press the function switch on the left to ON for manual control, the indicator will be on and the grinding head starts to move slowly.
<br />2.Rotate the speed control clockwise to accelerate the grinding head.
<br />3.When the function switch is pressed to the OFF, step on the pedal the speed will be accelerated, and loose the foot, the speed will be decreased.
<br />4.The turning directions can be swapped: FWD means clockwise and REV means counterclockwise.
<br />5.Adjust the speed of the grinding head within a reasonable range.
<br />6.Adjust the hand piece to the lowest speed before changing forward/backward direction or before turn off the machine.
<br />
<br />
<br />Package include:
<br />1x Nail Drill Machine.
<br />1x Handpiece .
<br />1x Handpiece Holder.
<br />1x Foot Pedal.
<br />6x Sanding Bands.
<br />6 x drill bits.