PRODUCT NAME
Phonelex Cell Signal Booster 850MHz FDD Band 5 70dB 3G Verizon AT&T GSM CDMA High Gain Mobile Phone
PRODUCT CODE: PROD1830095598
PRODUCT INFORMATION
The cell phone signal booster repeater can solve your poor signal reception problem inside your house,so you can enjoy clearer phone call or faster mobile date inside your house.
Technical Details
Product Details
Package Dimensions
Width : 7.87 inch
Height : 3.15 inch
Length : 16.14 inch
Shipping Weight: 0 ounce (View shipping rates and policies)
ASIN : B06WWN3T4R
Product Description
NOTE :
1. Before bid, please make sure your mobile frequency is 850mhz Band5 in your area.
2. This cell phone signal booster can only make the weak signal stronger , it can''t creat signal , that''s means it won''t give you any help in an area where there is no signal at all .
3. You should get 2- 3 bars of stable signal in the location where the outdoor antenna is fixed in.
Specification :
Frequency Range : Downlink : 869 ~ 894 MHz Uplink : 824 ~ 849 MHz
Input Power Range : -70~ -40dBm
Max Output Power : Uplink ?25dBm , Downlink ?27dBm
Max Gain : 70dB
Characteristic Impedance : 50
I/O Port : N-Female on both ends;
Power Supply : Input AC100~240V 50/60Hz, output DC 12V 2A
Package Contents:
* 850MHZ Cell Phone Signal Booster
* Indoor whip Antenna
* Outdoor Omni-Directional (tubular) Antenna With 32feet Cable
* Screws for Mounting
* AC Adapter
* English User Manual
Installation Guide:
1.Check and find a place where your cell phone can receive the best signal outside your house, usually on the roof, or similiar high places, then fix the outdoor antenna there, and the outdoor antenna should be pointing to the cell tower''s direction. (The outdoor antenna should not be higher than the lightning rod on top of the building.)
2.Fix the repeater device somewhere inside the house, the repeater should be fixed in a place where is near from the power socket, and have good ventilation.
3. Runs the cable on the outdoor antenna into the house, and connect the antenna cable connector on the OUTDOOR port of the repeater tightly.
4.Tightly connect the indoor panel antenna on the INDOOR port of the repeater.
5.Turn on the power of the repeater.
Attention:
The distance between the outdoor and indoor antenna should be above 8 or 10 meters. And there should be thick obsticles like walls between them.