Instruction:
-1. Remove all the polish, oil on your natural nails.
-2. Apply UV gel primer (base), no need to dry under UV Light.
-3. Apply a thin coat of gel over the natural nails.
(The thickness of the gel coating has a great effect on the degree of cure. It is much better to use three or four coats rather than one or two thicker coats. ) Place the nails under the UV Light for a full 3 minutes to cure the gel.
-4. Apply another thin coat of gel, and dry under the UV Light for another 3 to 5 minutes.
-5. Cleanse the nail with Cleaser Plus to remove the sticky surface residue.
-6. Apply 2 times thin layers of UV Gel top coat for final seal. Dry under UV Light for 3 minutes each time.
-7. Use Cleanser Plus to remove the excess UV topcoat.
Brand New
For Professional use only.
Note: The color combinations are more or less the same as the pictures but sometimes may vary slightly from batch to batch.
