*壓・はない・・呂蓮⇒┳・゛10晩參坪に・僕。・・嘖・泳佑・・呂發△蠅泙后・k僕瘁に弖・桑催を・佩。 ・瞳晩方は恷寄10-15晩の・・呂發△蠅泙后・
*兜豚音措?音措瞳による卦瞳?住・Q(3晩坪)の卦瞳僕創はお人・・・毅となります。
Realacc/Matek PDB-XPW 5V 12V Dual BEC PDB Built-in 140A Current Sensor XT60PW Socket
Realacc/Matek?PDB-XPW 5V 12V Dual BEC PDB Built-in 140A Current Sensor with XT60PW Socket
The PDB-XPW distributes power from a LiPo pack to 4 ESCs as well as providing synchronised & regulated DC 5V outputs & linear regulated DC 12V for powering Cameras RC receiver Flight Controllers Video Transmitters LEDs etc.It also has built-in 150A current module and offers a XT60PW socket to connect the LiPo pack conveniently.
Connections:
Layout:
Specification:? Manual
General:
-Input voltage range (3S-5S LiPo operation): 9 - 21V DC
-PDB: 4 x 35A
-Regulated 5V and 12V outputs
-Current module 140A
-LED power indicators ( 5V & 12V outputs )
?
Current Module
- 150A
-3.3V ADC
?
BEC 5V output:
-Designed for RC Receivers Flight controllers OSD and ?Servos.
-DC/DC synchronous buck regulator.
?
-Voltage: 5.0 +/- 0.1VDC
-Continuous current: 2 Amps (Max.2.5A ?10s/minute)
-Output Ripple: 40mV (VIn=16V ?VOut=5V@2A load)
-Short-circuit tolerant (5 ?seconds/minute)
?
BEC 12V output:
-Designed for Video TX or FPV camera with linear regulator.
-The battery should be 4~5S LiPo (13~21V DC)
- Voltage: 12.0 +/- 0.3VDC
-Continuous current: 500mA (Max.0.8A ?5s/minute)
-Short-circuit tolerant (2 ?seconds/minute)
?
BEC 12V @ 3S LiPo
-Output voltage= 3S LiPo voltage -1V
?
Physical:
-Mounting: 30.5 x 30.5mm Φ3mm
-Dimensions: 36 x 50 x 4 mm (w/o XT60PW) 36 x 58 X10.5mm (w/ ?XT60PW)
-Weight: 7.0g(w/o XT60PW) 11g(w/ ?XT60PW)
Features:
2oz copper 4-layers & 2mm PCB. Built-in current sensor 150A
Built-in XT60PW Socket
Total 4 pairs ESC solder tabs are fit for X type frame 5V & 12V Output LED indicators & Short circuit tolerant
Package included:
1 x?Realacc PDB