注意：不可以同时插两块SSD使用，一次只能识别一块SSD，NGFF部份此款转接卡仅适用于B-key或B/M-key的接口,不适用于M-key的接口

M.2(NGFF) 和MSATA二合一转 SATA 3.0 转接卡                       

1. 支持M.2 NGFF或MSATA的SSD固态硬盘转换为SATA2.5"/3.5"硬盘使用                                                        

2.完全兼容SATA3.1标准                                                                     

3.兼容PCI Express M.2协议                                                           

4. NGFF 及MSATA SSD允许输入3.3V电压，最大电流3A ，传输速率:6Gbps                                                                                  

5.支持80mm  60mm  42mm 30mm的M.2 NGFF SSD                                                                                              

6.支持全高及半高尺寸的MSATA SSD                  

7.此款转接卡同时只能连接一块SSD,优先识别NGFF的SSD
Note: Two SSDs can not be used at the same time. Only one SSD can be identified at a time. Some of the NGFF adapter cards are for B-key or B / M-key interfaces only, but not for M-key interfaces

M.2 (NGFF) and MSATA combo SATA 3.0 adapter

1. SSDs that support M.2 NGFF or MSATA SSDs are converted to SATA 2.5 "/3.5" drives

2. Fully compatible with SATA3.1 standard

3. Compatible with PCI Express M.2 protocol

4. NGFF and MSATA SSD allows 3.3V input voltage, the maximum current 3A, transfer rate: 6Gbps

5. Support 80mm 60mm 42mm 30mm M.2 NGFF SSD

6. Support full height and half height of the MSATA SSD

7. This adapter can connect only one SSD at a time, giving priority to identifying NGFF SSDs