Description:
<br />Motor Diameter: 6.0mm
<br />Motor Length: 15mm
<br />Shaft Diameter: 0.05-0.3mm
<br />Cable Length: 70mm
<br />Weight: about: 1.8g
<br />Option: Clockwise MotorWith Red Blue Wire, Anti-clockwise MotorWith Black White Wire
<br />Option: With 1.25mm JST Plug
<br />Quantity: 1 pcs
<br />
<br />1.Operating condition
<br />Rated voltaget3.4V DC
<br />Direction of rotationtCW and CCW
<br />Operating voltage rangetDC2.0--4.5V DC
<br />perating temperature ranget-10-50 C
<br />Motor positiontall position
<br />
<br />2.Mearsuring condition
<br />Motor positionthorizontal or vertical
<br />Power supplytregulated DC power supply assuring unquestionable measuring
<br />regulated DC power supply assuring unquestionable measuringt10-30 C  30-95%
<br />If the judgment is questionable,Measurent is to be made based on JIS Standard Testing Condition202 C,655% 
<br />Direction of rotationtviewedoutput shaft side
<br />
<br />3.Electrical characteristics
<br />ItemstSpecificationtStandard value
<br />No Load speedt59000rpm 12%t59000 rpm
<br />No Load currentt180mA maxt110mA
<br />Starting voltaget0.8V maxt0.5V DC
<br />Stall currentt2833mA 5%t2833mA
<br />Terminal resistancet1.2   5%t1.2 
<br />Insulation resistancet10M? mintAT 250V DC between
<br />motor terminal and case
<br />
<br />Cautions:
<br />1 Please use the motor in this technology index range for the performance of the motor is affected by environmental temperature seriously.
<br />2 It is not allowed to operate in the high temperature with high humidity, and not allowed to contact with corrosive liquid and corrosive gas,should not to be stored and without running Continuously for more than six months.
<br />3 Do not lock the motor shaft while the electric is on. The motor will be burnt out after the motor shaft was locked for more then 1 second.
<br />4 Do not hit the motor directly.
<br />
<br />Package included:
<br />1 x motor
<br />