SHOOT 6" Diving Underwater Dome Lens Housing Dome Port for Xiaomi YI 2 4K Action Camera Underwater Photography

This Dome Port can be used for Xiaomi YI 2 4K action camera underwater photography，Package size:9.44 inch x 7.87 inch x 3.93 inch(24cmx20cmx10cm)，Material:PC+ABS

It can dramatically improves camera's underwater functionality and image quality by moving the waterline away from the Xiaoyi lens，you can capture the amazing half underwater half above-water photos.Without the dome，you will get a split photo.

This dome port is designed with lens hood，which reducing lens flare，and protecting the lens from damage.

Installation instructions & Cleaning

Installation instructions
1.Unscrew the OPEN screws to lift the backdoor and take out the waterproof housing from the dome.

2.Put your Xiaomi Xiaoyi Yi 2 4k camera into the waterproof housing then put they back and screw the screws tightly.

3.Attach the grip to the waterproof housing，close the backdoor over the housing and tighten the backdoor screws until there is no space left between the screws and the dome.

Cleaning
1.Always rinse the dome with fresh water after seawater use.

2.If for some reason you need to clean the dome from the inside， you will need a size 8 allen key to remove all 10 screws that hold the dome in place. Make sure the dome port is clean before removing the dome. Always use cleaning agent that does not harm acrylic materials. Once your dome is cleaned re-attach it to the backplate and make sure there is no dirt， sand， hair or other debris along the rubber gasket that could compromise the integrity of the waterproof dome. Also make sure that the gasket is in place – it should be inside the narrow recess in the backplate. Tighten the screws until you get resistance， don’t over tighten them.

[Product Information]

Package size:9.44 inch x 7.87 inch x 3.93 inch(24cmx20cmx10cm)，Material:PC+ABS
If you want to capture half half images and improve your YI 4K camera underwater shots，then you need a dome port.By moving the waterline away from the YI 4K camera lens，a dome port dramatically improves camera’s underwater functionality and image quality.Plus，it allows you to make those sick split photo shots that are half underwater，half above it.
Comes with a handheld floaty grip，a waterproof housing case，and all the accessory bolts and screws，No other accessories are needed，just insert your YI 4K camera and you are ready to go.
To make sure the dome's waterproof ability，our factory did the Hydrostatic Water Pressure Test for every dome.But for the sake of insurance，we highly recommend you to test it without using your YI 4K camera before diving，and press harder and screw tightly when using it for diving.
Content:1 x Dome Port with waterproof housing case +1 x Floaty monopod+ 1x SHOOT Velvet bag