Item Descriptions:

Product introduction

A large aperture / telephoto lens that is familiar with the nickname of "Sannippa" has evolved newly.

By actively adopting magnesium alloy, we succeeded in weight reduction while maintaining necessary strength.

New coating technology that reduces ghost The introduction of SWC etc. realizes higher image quality than conventional models.

From Amazon

Features

A large aperture / telephoto lens that is familiar with the nickname of "Sannippa" has evolved newly.

By actively adopting magnesium alloy, we succeeded in weight reduction while maintaining necessary strength.

New coating technology to reduce ghost We have realized higher image quality than conventional models by introducing SWC and others.

Moreover, the camera shake correction effect is also increased to about 4 steps.

Usability in the field has also been improved, such as applying a fluorine coating to make the fingerprints etc. easier to wipe on the front / last lenses of the lens.

Fluorite lens

Thorough removal of residual chromatic aberration disturbing the sharpness of the shot image.

Almost complete removal of chromatic aberration is achieved, such as extremely low refractive index, low dispersion, and good transparency in the infrared and ultraviolet regions.

IMAGE STABILIZER

Canon's first image stabilizer IS (Image Stabilizer) for single lens reflex cameras installed in the world.

It is effective in the scene which is likely to cause camera shake, such as hand-held photography of a telephoto lens.

Ring USM

USM (Ultrasonic Motor) = Ultrasonic motor supports high focus / high response, quick focusing.

It has ideal characteristics as a lens driving motor, such as little operation noise.

Inner focus

A technology to reduce the total weight of moving lenses by using a part of the lens configuration as a focusing lens.

It realizes high-speed and precise AF control, excellent holding balance, and compactness.

Full time manual focus

After autofocus, manual focus can be instantly done just by rotating the focus ring after one shot AF so that the photographer can finally adjust the focus.

Dustproof and drip-proof

We make various parts dust-proof / drip-resistant high structure corresponding to professional harsh photographing situation, and prevent intrusion of dust and water drops.

SWC (Subwavelength Structure Coating)

Special coating SWC (Subwavelength Structure Coating) is a new antireflection technology that suppresses reflection of light by arranging innumerable nano-sized wedge-shaped structures smaller than the wavelength of visible light on the surface of the lens.

Even with lenses with large curvature such as wide-angle lenses, the occurrence of flare and ghosts in the periphery can be suppressed considerably.

Fluorine coating

New coating technology developed for the purpose of easy removal of dirt attached to the lens surface.

That is fluorine coating.

High in oil repellency and water repellency, it can be removed with a dry cloth without solvent.

It is also hard to get static electricity after dry wiping, and it is also a feature that it is difficult to get dust etc.

Surface is smooth, it is hard to scratch, there are also characteristics that it is difficult to attach water drops.

Product Specifications

● Field angle (Horizontal / Vertical / Diagonal): 6 ° 50 '· 4 ° 35' · 8 ° 15 '

● Lens construction: 12 groups 16 pieces

● Number of diaphragm blades: 9 (circular stop)

● Minimum Aperture: 32

● Shortest shooting distance: 2 m

● Maximum magnification: 0.18 times

Filter diameter: Insert 52 mm

● Maximum diameter × length: φ128 mm × 248 mm

● Weight: 2350 g

● Image stabilization effect: Approximately 4 steps *

* Based on the shutter speed of "1 / focal length" seconds, which is said to make camera shake easier when it is slower than this.

(It depends on sensor size of camera to use)

Features:

• Please enter model number Confirm this is compatible:
• 4411 B005 AA

Product information:

Shipping Weight: 7039 g

Package Dimensions: 34.49 x 34.70 x 50.09 cm