This manicure and pedicure instrument is equipped with high-quality attachments.
The basic version includes 7 attachments with long-life sapphire coating or polishing felt.

Together with the 2-level speed control and clockwise/anticlockwise operation,
this ensures a professional pedicure and manicure that would otherwise only be possible at a podiatrist.



This instrument is intended only for the treatment of hands (manicure) and feet (pedicure).
– Select an attachment and push it onto the instrument spindle using a slight pressure. To remove: pull the attachment and instrument apart in
the axial direction (straight).
– Switch the device on by moving the slide switch down (anticlockwise,
LED red) or up (clockwise, LED green).
– All file and cutting attachments are coated with a sapphire grain.
This guarantees extremely long life and almost guarantees freedom from
wear.
– You can select one of two speed settings (Hi and Lo). Press the corresponding
button on the device
– Do not exert heavy pressure and always guide the attachments carefully
over the surface to be treated.
– Move the instrument under light pressure in circular movements slowly
over the parts to be treated.
– Note that the cutting attachments will have a reduced effect if the skin is
softened or moist. For this reason, do not carry out any pretreatment in a
bath.
– Do not remove all the callus skin in order to retain the natural protection
of the skin.
– Always ensure that the spindle can rotate freely. It must never be permanently jammed, otherwise the instrument will become too hot and suffer damage.
– After every use, apply moisturizing cream to the parts treated.
MP40-Filzkegel-Hand.jpg
  • Complete set
  • 2 levels
  • Operates in clockwise / counterclockwise direction
 
 
 

Package content
Delivery time according to the information above to Aargau, Appenzell, Appenzell, Basel, Bern, Freiburg, Geneva, Glarus, Graubünden, Jura, Liechtenstein, Luzern, Neuenburg, Nidwalden, Obwalden, Sankt Gallen, Schaffhausen, Schwyz, Solothurn, Thurgau, Tessin, Uri, Wallis, Waadt, Zug, Zurich.

1x Manicure/Pedicure set Beurer MP40

Attachments
  • Sapphire disk, fine - Filing and treatment of the nails, fine grained sapphire disk. The specific aspect of this sapphire disk is that only the inner disk rotates, while the outer support is stationary. This enables precise filing of the nails without the risk of burning the skin with the
    fast rotating disk.
  • Sapphire disk, coarse - Filing and treatment of the nails, coarse grain sapphire disk. This attachment allows you to shorten even thick nails by filing. Since it quickly removes large areas of the nail, you should proceed with caution in this case also.
  • Sapphire cone - Removal of dry skin or calluses from the soles of the feet and from the heels and for manicuring the nails.
  • Felt cone - Smoothing and polishing the edge of the nail after filing as well as for cleaning the nail surface. Always polish in circular movements and do not allow the felt cone to rest in one place, otherwise friction could cause heat to develop.
  • Sapphire callus rasp - For rapid removal of stubborn calluses and hard skin
    on the soles of feet and heels This attachment can be used on large areas.
  • Cylindrical milling cutter - Grinding of lignified foot nail surfaces as well as smoothing of these. For this purpose, apply the milling cutter horizontally to the nail surface and remove the unwanted layer of nail using slow circular movements.
  • Flame milling cutter - For removing ingrowing nails. Carefully guide the
    flame cutter up to the part to be treated and remove parts of the nail as necessary.
MP40-Pouch.jpg
  • Speed: 3.800 - 4.600 rpm
  • With pouch
  • Powerful mains operation - with gearing mechanism
 
 
 

Technical specification
Ask a product question

  • Complete set
  • 2 levels
  • Operates in clockwise / counterclockwise direction
  • Speed: 3.800 - 4.600 rpm +/-14%
  • 7 attachments included: sapphire cone, felt cone, sapphire wheel fine, sapphire wheel coarse, flame milling cutter, cylindrical milling cutter, sapphire callus sander
  • With pouch
  • Powerful mains operation - with gearing mechanism

    Does NOT work with the replacement bit set - Beurer Nail Bit Set for MP60, MP61!
  • Color: White
MP40-Zubehoer_mit_MP40.jpg