[Seed style] LED strobe light bulb T10 / T16 wedge ultra-high brightness SMD5 series of white light / flash switching two set

Item Descriptions

★ add a strobe function is 3chip5 series valve two set of T10. Versatility is also high can be used such as position-number light . ★ switch ON⇒ strobe light OFF will ON⇒ lit again. ■ the latest SMD element is five T10 type LED wedge bulb white two set that you use. By using the latest high brightness SMDLED it has achieved the brightness and diffusion of not ever! Location can also be mounted was not attached until now because it is quite small. ■ 1 piece in the front by arranging the four SMDLED on the side and the light is diffused efficiently. Socket: T10 (T16 size ball socket also can be attached because it is the same size) Enter the number of: two set emission color: white color temperature: the best in about 5500-6000K dress-up and excellent compatibility with HID. The combination of yellow position of the halogen to HID parentheses is bad! ※ Please understand that it may differ from the actual colors in the image. [Specification] 12V only Dimensions Width: MAXφ12mm length: about 28mm outlet: about 9mm Please note before you buy be sure to ask the possible or prior confirmation attached to the place you want to use. Product changes and returned goods absolutely do not do due to the size difference. Mounting please go at your own risk. Some of the luxury car to determine the sensor with the ball out because there are times when a warning or the like is turned on please note. Since the LED there is a polarity if you do not want to light up and plug in the opposite direction. Labor and took to the mounting in any case does not perform such as corruption component of compensation. Such as the location that may trap heat please pay attention because there is a case where life is significantly shorter in some places to be attached. For SMD is a precise chip structure as compared to the normal LED please pay attention to handling. Do not touch with bare hands because there is to be easily damaged by or applying force the occasion of the work done on the wearing the gloves and the like please do the installation while holding to avoid the light-emitting part. Labor and took to the mounting in any case does not perform such as corruption component of compensation.