100% Original MASTECH MS8910 SMD RC Resistance Tester Capacitance Meter Auto Scan Dropshipping
Brand: MASTECH
Model: 8910
RC Resistance Tester Capacitance Meter
The Tester is a handheld and battery operated very convenient small Tool that is specially used to measuring SMD (Surface Mounting
Device), there are Chip type resistor, Chip type capacitor and diode, for example. Moreover, the Tester have the continuity checking function
The Tester is automatically identified the passive Component as has been indicated above. Therefore, the measurement are allowed by fully automatic detection. The Tester is designed to meet IEC1010-1 standard and Stipulation of 2-Poulation Grade. The Tester conform to the European Unions following Requirement: CE regulation 89/336 (EMC Electromagnetic Compatibility)
The entire outer surface of the Tester case has been with thermo plastic elastomer, and the two testing pins has been gold-plated, so that it is reduce pin contact resistance and prevent to get rusty.
This operating instruction covers information on safety and caution, so please read relevant information carefully and observe all the warming and note strictly.
Features:
3000 counts LCD display
Full automatic measurement
Auto scanning the Resistance/Capacitance/Diode
Function selection by one FUNC Push Button
Data Hold function
Continuity Checking function
Over Load Indication ( OL)
Low Battery Indication
Power Supply: 3V Lithium Battery CR2032 (included)
Auto Power OFF. If the Tester is idle for more than 10 minutes, the tester will automatically turn off the power .
Operating temperature & Humidity: 0 ~ 40C(32 ~104F) & < 80% RH
Storage temperature & Humidity: -10 ~ 50C (14 ~ 122 F) & <70%RH
Safety Class: IEC61010-1, 50V CAT III
EMC: According to CE regulation 89/336.
Dimension (L x W x H) & Weight: 170 x 31 x 17mm, Approx. 48.6 g
Resistance
Range Resolution Accuracy
300 0.1 (1.0% of rdg + 2 digits)
3K 1
30K 10
300K 100
3M 1K
30M 10K (1.2% of rdg + 3 digits)
Capacitance
Range (F) Resolution (F) Accuracy
3n 1p (2.5% of rdg + 3 digits)
30n 10p
300n 100p
3n 1n
30n 10n
300 100n (3.0% of rdg + 3 digits)
3m 1
30m 10
Continuity The buzzer will sound if the resistance is less than 30 ohms
Diode Check Testing current: 2mA Open Circuit voltage: 2.8 V

Accessories:

1 Two free replace test pin

2 1 unit of CR2032 Battery

3 MS8910 X1

IMG_1927IMG_1920IMG_1912IMG_1906IMG_1905

1 We accept Alipay, West Union, TT. All major credit cards are accepted through secure payment processor ESCROW.
2 If you can\`t checkout immediately after auction close, please wait for a few minutes and retry Payments must be completed within 3 days.
1. WORLDWIDE SHIPPING. (Except some countries and APO/FPO)
2. Orders processed timely after the payment verification.
3. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address.
4. The images shown are not the actual item and are for your reference only.
5. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
6. If you have not received your shipment within 30 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
1. 12 months Manufacturer`s limited Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.
2. Defective items MUST BE reported and returned within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your order number. WE DO NOT REPAIR OR REPLACE ITEMS WITH AN EXPIRED WARRANTY.
You agree to all of the above-listed policies upon ordering on aliexpress!
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns
1