SCI10 type scale filter

First， the product features
3M brand SCI10 type scale filter is mainly applicable to supporting the installation of 3M， in the water filter to municipal water as water purification and filtration process， effectively prevent， ease the formation of the phenomenon of calcium and magnesium compounds (scale) precipitated.




Second， the main ingredients and components
Filter medium: type 40 polyphosphate
Housing: Polypropylene
More components of raw materials in line with the US FDA (Food and Drug Administration) CFR21 material standards
Third， the scope
In municipal water for the water， and with the 3M water purifier filter supporting the use.
Fourth， the main technical parameters
Rated total net amount of water: 20 m3
Water flow: !#!lt!*!5.6 l / min
Working pressure: 0.172-0.862 MPa
Water temperature range: 4.4-37.8 degrees Celsius
Phosphate concentration: !#!lt!*!5 mg / liter
V. Notes
1，3M brand SCI10 type scale filter can help relieve post-heating water formed floating or sinking to the bottom of the precipitation. Scale effects related to water quality.
2， under normal water conditions， installation 1-2 days to stabilize the effect. Under the conditions of use section， the initial use will cause the vessel wall residual precipitate off.
3， the first flush toilet， for 3-5 minutes before use. 1-2 days also recommend disabling drain 1-2 minutes rinse after use.
4， to replace the filter regularly to ensure efficiency and water quality and safety.