Voltage detection, Lower limit voltage: nL1 Upper limit voltage: U-1: Charging measurement: When the measured voltage is lower than the lower limit voltage, the relay pulls above the upper limit voltage, the relay is disconnected; U-2: discharge detection: when the measured voltage is lower than the lower limit voltage, the relay is off, higher than the upper limit voltage, the relay pull;
U-3: interval between the pull: When the measured voltage between the upper and lower limits, the relay pull, the other circumstances off; U-4: interval outside the pull: the measured voltage below the lower limit voltage or higher than the upper limit voltage, the relay pull, the other case the relay is off
Timing / counting function: After the P-1 signal is triggered, the relay turns on the OP time and then turns off. In the OP time, the following operation; P1.1: Invalid trigger again; P1.2: Trigger again again; P1.3: Trigger relay reset again; P-2: Signal trigger function: Start time CL, timing completion Relay pull-in time OP Disconnect (reset) CL and OP time are adjustable
P-3: signal hold function: when the trigger signal, the timer CL, if the signal period disappears, then stop the timer and CL clear; CL timer to complete the relay pull; when the signal disappears, timing OP, timing completion relay disconnect , During the timing OP, trigger the signal again, OP cleared, when the signal disappears, the re-time.
P4.1 signal self-locking function: to a valid signal, timing CL, timing to complete the relay pull; give a valid signal, timing OP, timing to complete the relay disconnect, cycle. (The signal is triggered again during the delay period)

Technical Details

Product Details

Package Dimensions
Width : 4.21 inch
Height : 0.79 inch
Length : 6.06 inch

Shipping Weight: 1.28 ounce (View shipping rates and policies)

ASIN : B077P3G8QY