Features:<br />The USB interface connected to the 2.5 and 3.5 inch IDE and SATA hard disk interface<br />USB2.0 TO IDE/SATA high-speed connection.<br />USB2.0 high speed transmission・ stable performance・<br />Support CR cd-rom・ DVD・ cd-rom・ CD - RW・ DVD RW.<br />Support system: Windows 2000・ me・ XP・ Vista and Mac OS<br />Under Windows 2000 / ME/XP/Vista・ don't need The drive<br /><br />* the solidification structure・ stable performance<br />* USB transfer IDE/SATA conversion line<br />* conversion head integration (2.5 inch・ 3.5 inch and 5.25 inch・ type hard disk (below 320 g)・ cd-rom (The recorder)<br />* support hot plug・ plug and play.<br />* can be used in hard disk・ cd-rom・ Campbell・ MO・ ZIP transfer thereof.<br />* good compatibility・ can realize data exchange across the hardware platform.<br />* transfer rate quickly・ the transfer rate of up to 480 MB/s.<br /><br />Specifications:<br />USB Cable Length: 62cm/24.41in.<br />4 Pin power cable Length: 17.5cm/6.89in.<br />SATA cable Length: 36cm/14.17in.<br /><br />Using Information:<br />1. Place the hard disk (add hard disk box) of the jumper wire to the disc (MASTER) mode Before using.<br />(there is no power cord and other accessories)<br />2.the connection order<br />(1)first connect the power cord line to 220 v mains.<br />(2)connect the power adapter to the power cord end (so as not to spark phenomenon caused by the electric current is too large・ a few may be burned power adapter).<br />