NOTE: If you do not install it, ask a professional to install it.
Please check the motherboard's BIOS system to see if there is a SSD.
Because the product is a new solid-state drive, you must partition the computer to read this drive.
The operation steps are: Right-click My Computer -> Device Management -> Disk Drive -> Right-Click Scan Hardware Changes.
If the disk drive has 2 disks, it means that the SSD has been recognized.
You can use the Youtub or Google search to partition the SSD.
Product Features:
1. 100% Brand New, High Quality, Lightweight Slim Design!
2. SATA3 6Gb/s high-speed interface and CMOS low-power technology are used to reduce the power consumption.
3. Supporting optimized instructions such as NCQ / TEIM / SMATR and etc., it can not only enhance the hard drive's writing performance but also reduce the loss chance and slow down the performance decrease, thus effectively extending the life of the hard drive;
4. Standard SATA interface and 2.5-inch design are adopted for direct replacement of the original 2.5-inch mechanical disk of the laptops and computers;
5. SATA3 6Gb high-speed interface is designed to be backward compatible with SATA2.0 / 1.0;
Product Specifications:
Product type: solid state drive;
Model: vaseky350GB;
Dimension: 2.5 inches
Interface: SATA 6Gb/s;
Storage capacity: 350GB
Reading speed: 550MB/s;
Writing speed: 520MB/s;
Power consumption: 0.1W
Storage temperature: -55-75 degrees Celsius
Operating temperature: 5-70 degrees Celsius
Package Includes:
1 x Vaseky350GB high-speed solid state drive
Question Answer
Question : 5. The motherboard does not recognize the disk and the partition fails.
Answer : Motherboard BIOS can restore factory settings
Question: 6. msata is installed, but bios cannot be started from msata. There is no other way to boot from msata.
Answer : The system is installed on Msata. (If it fails, it is a mistake. See a professional for help.
Question :7.M.2 has an old system that cannot be installed, or the system is abnormal after installation
Answer : The installation of the system does not work properly, so check the memory. If the memory is damaged, the system may not be installed properly, or the operator may install the system incorrectly. If the system can be properly formatted and partitioned, then the hard disk is proved to be good.
Question :8. The buyer has been red after installing the solid state. The hard disk is not found in the BIOS and the system.
Answer : Make sure the interface is not SATA protocol (it is also not compatible with SATA protocol
Question :9. How to move the original hard disk system and data to the new hard disk?
Answer : The data can be moved, the system can't be moved, the new hard disk is divided into areas, and it can be moved directly.
Question :10. The solution for the SSDs on the computer cannot be read as follows
Answer :
A, only need to partition the computer can be solved, if it is Win7 system, you can use Windows' own disk manager can be partitioned, "manager" - disk, see the hard disk after the above right - create - according to your The need to divide the partition size - the format selected NTFS - quick formatting where the hook - after the implementation can be seen in the "My Computer"; if it is XP system, you can install a partition software, search the Internet, There are many. B. After the partition is over, open "My Computer" and you will see that the partition has succeeded. 
