• 6 Optional Bits (5 diamond bits, 1 emery rod with 6 sanding bands)
    • n
  • Variable speed control: 3,000 RPM up to 20,000 RPM
    • n
  • Voltage: AC 100-120V (US plug)
    • n
  • Multi use: carving, engraving, routing, grinding, sharpening, sanding, polishing, drilling and so on
    • n
  • Size: 6.2u0026#34; INCHES 16cm (L) x 2.4cm (Diameter of handpiece)
    • n

    How to use:

    Plug in the electric cord to the main electric outlet

    Select the desired speed by turning the variable speed control knob on the handpiece

    To secure the bits: push in the desired bit firmly into the hole

    To remove the bits: turn off the machine and gently pull the bit out.

    Safety Tips:

    Do not use near or place in water. If motor falls into water, unplug immediately.do not reach into water

    Do not touch the bit after use. The bit is too hot to be touched by bare hands

    Keep dust out of eyes and lungs by using protective eye-wear or a dust mask

    Always unplug it after use

    When the machine is not in use, all tool must be stored in a dry location and keep away from children.

    Always unplug the tool when you change accessory

    Package

    1 x Pen-Shape Nail Drill

    1 x Power adapter

    6 x Metal Grinding Drill Bits

    6 x Sanding bands

    1 x English Manual