• The PDB-XPW distributes power from a LiPo Pack to 4 ESCs, as well as providing synchronised Regulated DC 5V out puts linear regulated DC 12V for powering cameras, RC receiver,Flight Controller, Video Transmitters, LEDs, etc.
    • n
  • Features ------ Built-in current sensor 140A. Built-in XT60PW Socker. Total 4 pairs ESC solder tabs are fit for X type frame. 5V 12V Output LED indicators Short circit tolerant. 2oz coppter, 4-layers 2mm PCB.
    • n
  • Dual BEC output ------ BEC 5V output: 5.0 +/- 0.1VDC Voltage,Continuous current: 2 Amps (Max. 2.5A 10s/minute) BEC 12V output: Voltage: 12.0 +/- 0.3V DC, Continous current: 500mA ( Max 0.8A 5s/minute).
    • n
  • Specially design for X Type Drone ------ with a XT60PW socket, it is convenient to connect the Lipo pack for X Type drone frame, such as QAV X X250 X220 X210 X180 Drone Frame, and so on.
    • n
  • With A Crazepony Strap, meeting your need for fixing your battery or others
    • nFeatures:
    2oz coppter, 4-layers andamp; 2mm PCB
    Built-in current sensor 140A
    Built-in XT60PW Socker
    Total 4 pairs ESC solder tabs are fit for X type frame
    5V andamp; 12V Output LED indicators andamp; Short circit tolerant


    Specifiations:
    General:
    -- Input voltage range( 3S-5S Lipo operation): 9-21V DC
    -- PDB: 4 X 35A
    -- Regulated 5V and 12V outputs
    -- Current module 140A
    -- LED power indicators ( 5V andamp; 12V outputs )

    Current Module
    -- 140A
    -- 3.3V ADC

    BEC 5V output:
    -- Designed for RC Receivers, Flight controller, OSD, and Servors.
    -- DC/DC synchronous buck regulator
    -- Voltage: 5.0 +/- 0.1VDC
    -- Continuous current: 2 Amps (Max. 2.5A 10s/minute)
    -- Output Ripple: 40mV(VIn=16V, Vout=5V2A load )
    -- Short-circuit tolerant (5 seconds/minute )

    BEC 12V output:
    -- Designed for Video TX or FPV camera with linear regulator
    -- The battery should be 4-5S Lipo (13-21V DC)
    -- Voltage: 12.0 +/- 0.3V DC
    -- Continous current: 500mA ( Max 0.8A 5s/minute)
    -- Short-circuit tolerant ( 2 seconds/minute)

    BEC 12V3S LiPo
    -- Output voltage=3S Lipo voltage - 1V

    Physical:
    -- Mounting: 30.5*30.5mm
    -- Dimensions: 36*50*4mm(W/o XT60PW),36*58*10.5mm(w/ XT60PW)
    -- Weight: 7.0g(W/o XT60PW),11g(w/ XT60PW)

    --------------------------------------------------------
    Package Including
    1 * PDB XT60 Powe Distribution Board Dual BEC 5V/2A 12V/0.5A Build-in 140A Current Sensor
    1 * Crazepony Strap