The rain eyebrow is soft material， suitable for most of the models on the market mirrors， as some riders reflect adhesive was not strong， I want to say that this product has several sticking points， one must To clean the sticky position， preferably with an alcohol wipe， the second is to have a hair dryer to 3M adhesive heating， hair dryer under no circumstances， can be hot with a lighter， attention is the "Chi"， not "burn" and the third is must be a shape， repeated construction will reduce the stickiness

[Material] soft plastic

[Size] Width 5cm， 12cm long flat-topped Central

[GW] 0.15kg

Products：

The new air-dry style mirror rain gear， is a very clever design rearview mirror rain gear， in addition to the storm features， at the top of the back of a row of inlet design， high-speed driving， when， in the face of the wind right through into outlet straight turn in the wind， blowing in the rearview mirror， mirror on the stick blown away excess Raindrops keep the mirror clarity to ensure clear vision to ensure road safety.

Features
1， with the outlet of this product， and general mirror block is different.
2， the product uses 3M super double sided tape， waterproof， very easy to fall off.
Usage
1， the protection of the double-sided tape on greaseproof paper torn 2 ~ 3cm;
2， along the outer edge of the mirror housing accurate sticky paste.

[Note]
1. Make sure the top of the rear-view mirror at least 10cm long flat parts， also slightly curved. But the circular mirror (such as QQ and other models) is not suitable for installation.
2， the installation， be sure to clean sticky paste parts of the oil and keep it dry to ensure results.
3， this product， please stick to the outside rearview mirror affixed to the cover edge， different around， make sure the correct position after a sticky paste.




The installation process diagram:

 

Approved color is available. Figure:

3.At temperatures below 20 ℃， the best baking hot roasted gun or hair dryer look at the temperature is too low to avoid situations film excellent， easy to paste， baking the inside， as shown schematically:

 

4. When installed along the slot can be. Illustration:

Rubberized

定形