Open Jumper OJ-KZ008 Zduino Ethernet (5100)Module Works with Official Arduino Ethernet

Features:

.Zduino Ethernet, which contains USB download, POE power, TF card slot etc. aswell as lead foot position, is a micro controller board based on ArduinoEthernet
.With this module, you can connect micro controller to internet and build yournetwork application. The built-in W5100 network module can transform Arduino intoa web server; It can use Ethernet library file in IDE to make a simple webserver
.TCP/IP Ethernet controller W5100 supports Power Over Ethernet, Micro SD card(TF card)
.Micro USB download: Supports Micro SD (8GB max.) reading and writing
.Ethernet and Micro SD card use the same SPI slot via time-sharing multiplexingtechnology interface 4 and 10; More SPI connection is supported when interface4 and 10 are prioritized

Specifications:

.Model: OJ-KZ008
.Material:PCB
.Microcontroller: ATmega328p
.Operating Voltage:5V
.Input Voltage (recommended):7-12V
POE input module voltage: 7~30V (48V is needed)
I/O foot: 14; 3, 5, 6, 9, 10, 11 interfaces are for PWM output; 10, 11, 12, 13interfaces are for SPI communication; interface 4 is for TF card CS; Interface10 is for W5100 CS; Interface 2 is for disconnecting
Analogue input pin: 6
DC output of each I/O: 40mA(The total working current of the processor shouldnot exceed 200mA 3.3V)
DC output: 50mA
Flash memory: 32KB (0.5KB for bootloader, 2KB for SRAM, 1KB for EEPROM)
Working clock: 16 MHz
Compatibility: Arduino Duemilanove (168 or 328), Arduino UNO(Does not supportArduino Mega 1280 and Arduino Mega 2560)
.Product Weight:40g
.Package Dimensions:79*60*21mm

Package Content:

.1 x Open Jumper OJ-KZ008 ZduinoEthernet (5100) Module