Characteristic.

Ultrasonic range finder is fully applicable to the family decoration， buy air volume， calculating the area of real estate agents or construction workers must， need fast measuring room and room area of the tool， ultrasonic range finder to measure the distance from 0.50M to18M. (1.5 feet60 inches ) ultrasonic range finder is using the launch ultrasonic wave to the measured object， and then calculating the ultrasonic distance measurement to determine the round-trip time.

Reference parameter:

Measuring range:50 cm ~18 M

Error:5/1000

Resolution: 0.01meters

Maximum measured distance: 18 meters

The maximum distance and:180 meters

The calculated maximum size: 18x 18square meters

The calculated maximum volume:1800 cubic meters

Battery:9V

Transmit frequency:40kHz

Accuracy:± 0.5%

Resolution:0.01M

Operating temperature:0 ° C to 50° C

Product introduction:

Ultrasonic range finder in foreign countries are called" electronic tape"， applicable to the construction， decoration， engineering and other places， can do the traditional tape beyond one\'s strength one\'s power measurement. Our sales of ultrasonic range finder based on data provided by the manufacturers that have is the relatively good performance of products， but also in Europe and the United States market share is very high， compared to other brands of the rangefinder in an ultrasonic horn， anti-jamming and so on have obvious difference.

Model: CP-3007

Export products， English instruction! If need Chinese instruction to electronic documents is provided.

Infrared range finder ultrasonic rangefinder works ranging wireless ranging is really convenient!

Measurement matters needing attention:

1ultrasonic range finder is a measurement of the obstacle behind the machine bottom distance， rather than from the top to the top， if accurate， you\'ll find out display distance and the actual distance always10 a few errors of CM， ha ha.

2when measuring body and walls to maintain the vertical， especially the measured distance， more vertical， measure data precision is higher， and slope is bigger， more error. Long distance measurements suggest a laser positioning so as to maintain the vertical

The latest CP3007 laser range finder ultrasonic range finder

Detailed Chinese manual:

Guide to the use of CP-3007ultrasonic range finder

Get ready

Battery installation

You need a 9V battery range finder. In order to better use and prolonging life， we recommend that you use alkaline battery.

Please according to the following steps to install the battery:

1 in accordance with a battery chamber in the direction of the arrow to put;

The 2 cover is pushed open the battery room， has the positive and negative poles ( + and - )，

3open the lid

4when the display power is low or rangefinder cannot run， please change the batteries.

Warning: if a month or more than a month no， please take out the battery， so as to avoid the battery for long time without leakage damage the instrument.

Range finder of the stabilization treatment:

The instrument is sensitive to temperature and humidity， before use，15to 30 minutes until the range finder is stable at room temperature.

Use

Range finder switch:

To open this instrument， please click" MEASURER" even in the dim light can easily display screen， voltage stability， can be seen at the time of the environment temperature.

In 30 seconds if not will automatically shut down.

When measuring:

1click on the" MEASURE"， the instrument will measure radar instrument arrives at the other end to test.

2so that the bottom of the apparatus is close to the wall， presumably the ceiling to floor distance. Make sure you measured the distance between obstacles， your head or your hand not in front of the measuring instrument.

3repeat according to" FEET" or" METER"，" FEET" expressed in feet measurement， or "METER" expressed in meters measurement.

Explain.

Measuring instrument display is generally in about 30 seconds， if you change another mode is about 30 seconds.

If you measure the range of less than 2feet (0.5 meters) or more than60 feet (18.288 meters ) will display" ERROR"

Measurement of small secret:

Some curtains can absorb sound waves， leading to inaccurate measurement of measuring instrument. If you have the indoor curtains for the measurement of the words， please turn on the other side of the window curtain， to shut the window.

If the measured distance of an obstacle in words， the ultrasonic measurement data is not correct， such as tables， chairs， and other obstacles. If you\'re not sure measurement is correct， then you can proceed from different angles measurement.

If you measure the uneven place or very narrow corner， then you get data is error.

If the measured distance is more than 60 feet (18.288 meters ) select the house in the middle of a point， for instance: from point to each side measuring， and then add it.

To reduce the measuring error:

1 in accordance with these steps" measure" to measure a size

2click on the" STORE " button， you can put the measurement data is stored in a memory card M1， M2or M3 cards.

3 if necessary， repeat the above the first and second steps to store data.

4. If you want the data stored in the memory card which， according to M1， M2 or M3 card. Such data exists.

5if you want to store the new data， it directly to the original data can be deleted.

6 if you want to delete all the data words， then press "ALL MEMORY CLEAR" press and hold for 3 seconds， then all of the data as well as M1， M2， M3and the like will disappear.

Note: removed after the date and the sound is not preserved

Measurement of volume:

Want to measure housing sound， to measure the height， width， length， and then stored for each data into different memory card please see" Saving a Measurement"， then press" VOLUME"， sound is computed and stored it out.

Measurement of area:

According to the following steps to find two empty storage space:

1 measurements of height and width is stored in the M1 and M2 memory card， press "AREA" to" M1" and" M2"， data storage.

Add， subtract， multiply and divide the storage

1measurements of any of the two dimensions， preserved in M1 and M2，

2by the "ALL MEMORY CLEARE " button

3by the "M1" and" M2" plus other to add data or press the "M1" minus" M2" reduce other to reduce data， so to add or subtract data out.

4if you want to store additional data or to clear the memory please click" ALL MEMORY CLEARE " on it.

The use of laser:

To use the laser， press" LASER" for 5 seconds， if do it automatically closes the function of laser.

Specifications.

Battery:1 9V batteries. ( not included)

Instrument for measuring unit is in feet and meters.

Accuracy:0.005+1

Frequency:40 kHz

Measuring range: 0.50to 18.288 meters

The typical specification， the individual may change， specifications are subject to change without notice for improvement.

Be careful.

Laser emission of650 nm for the visible laser wavelength.

Don\'t stare at the laser beam， also do not use lasers to shoot anyone\'s eyes