EX Junction Box is Key to Managing your Pedalboard Train, Provides Single Entry and Exit Point. Its Input goes to the Train and the Train''s Output Returns to the Box. The Box''s Output then Connects to your Amplifier.
The Junction Box''s Input Could be a Single Guitar or Microphone, or Multiple Inputs (e.g., guitar, keyboard and microphone). The Input Would be a Pre-amplified Mixer.
Features Two 1/4 Inputs & Outputs Designed To Be At The Beginning And End Of A Signal Chain. Whatever you Want to be Conditioned by the Devices on the Pedalboard needs that Single Entry of the Junction Box.
The Junction Box could Either be Mounted to the Pedalboard or Externally from the Board, Placing it on Top of the Amplifier or Mixer, etc. The Junctioin Box need to be Shielded against Interference from Ground Loops and 60-cycle AC Lines.
Look for a Power Supply with Multiple 9V Outputs Isolated from Each Other at the Secondary Winding when Connecting two or more Devices together.

Technical Details

Product Details

Product Dimensions

Package Dimensions
Width : 2.44 inch
Height : 2.2 inch
Length : 4.44 inch

Item Weight: 2.24 ounce (View shipping rates and policies)
Shipping Weight: 7.04 ounce (View shipping rates and policies)

ASIN : B07422M8XX

Product Description

? EX Junction Box is Key to Managing your Pedalboard Train, Provides Single Entry and Exit Point. Its Input goes to the Train and the Train''s Output Returns to the Box. The Box''s Output then Connects to your Amplifier.
? The Junction Box''s Input Could be a Single Guitar or Microphone, or Multiple Inputs (e.g., guitar, keyboard and microphone). The Input Would be a Pre-amplified Mixer.
? Features Two 1/4 Inputs & Outputs Designed To Be At The Beginning And End Of A Signal Chain. Whatever you Want to be Conditioned by the Devices on the Pedalboard needs that Single Entry of the Junction Box.
? The Junction Box could Either be Mounted to the Pedalboard or Externally from the Board, Placing it on Top of the Amplifier or Mixer, etc. The Junctioin Box need to be Shielded against Interference from Ground Loops and 60-cycle AC Lines.
? Look for a Power Supply with Multiple 9V Outputs Isolated from Each Other at the Secondary Winding when Connecting two or more Devices together.
With a pedal board junction box it is easier than ever to get signal in and out of your pedal board. The box is hooked up to the beginning and end of your signal chain letting you have an easy, one-stop place for connecting your gear. Plug your instrument into the junction box and run the output to your amp. No more lifting up the board to get to your pedal on this side and tilting it to get to the pedal on the other side. And with the jacks being right on top of the junction box is only takes seconds to plug in.