RadioLink R7EH-S 2.4G 7CH Receiver For T6EAP T6EHP T7F TransmitterDescription:Brand Name: RadiolinkItem Name: R7EH-S receiverChannel: 7CHMax input voltage: 6VSize: 50*24*15mmWeigh: 11.4gCurrent: 19-25mA (voltage 5V)Signal output: S-BUS、 PPM and PWMPWM signal mode: Green LED、 output 8 channels PWM signal.SBUS\/PPM signal mode: Both red and green LED on、 CH1 output S-BUS signal、 CH2 output PPM signal、 CH3 to CH8 output PWM signal at the same time、 FHSS、 nice anti-interference.Features:R7EH-S、 2.4G 7 channels receiver、 FHSS、 use for Radiolink TX T4EU、 T4EU-6、 T6EHP-E、 S-BUS、 PPM and PWM signal is possible working at the same time. How to match code with transmitter:First、 turn on the transmitter、 then give power to receiver、 there is a black button near the antenna、 use a thin stick press the button two seconds and release、 receiver light start blinking、 after about 8 times blinking、 match code success when receiver signal LED on! S-BUS、 PPM and PPM signal change:Short press the ID SET switch two times within 1 second、 the signal is changed from normal PWM to S-BUS or PPM. The green LED indicates the normal PWM and red&green LED indicates S-BUS or PPM signal. Fail safe:Receiver will output signal:throttle zero、 other channels keep the last signal from transmitter when receiver can't receive signal from transmitter within 1 second.Package included:1x RadioLink R7EH-S 2.4G 7CH Receiver