free shipping & drop shipping



Digital Thermometer & TIMER


Model:TA-238


This device provides you with an easy to use the Thermometer & Timer with alarm function in kitchen， factory or BBQ.


USING THE THERMOMETER


1.Use one 1.5 volt. AAA Battery.


2.Push the TIMERTHERMO to THERMO


3.The thermo-temp. and set temp. will be displayed


The thermo-temp. is showing the current temperature.


The thermo-temp. is showing set temperature for alarm function.


25Degrees Celsius THERMO-TEMP


50 Degrees Celsius SET-TEMP


4.The default set temp. is 50 Degrees Celsius. Use the UP or DOWN button to set the proper temperature


To decrease the set temp. press DOWN


To increase the set tem. press UP


Hold the DOWN or UP button down for a fast decrement or increment.


5.If you have set a Worong temperature， simply press DOWN and UP simultaneously to reset


6.Press the START button once ，the alarm stand by mode will replace the setting mode


7.The alarm will sound when the THERMO- TEMP. reaches the SET-TEMP.


8.Press STOP button once to stop the alarm . Temp. Range: -50~300Degrees Celsius (-58~572 Fahrenheit)



USING THE TIMER
The timer is used to keep track of your setting time in hours ，minutes， and/or seconds



1. Push the TIMER-THERMO button to the TIMER .The setting mode will be dispayed.


2. Press the MIN and SEC buttons simultaneously to reset.(You may repeat this step anytime to stop or reset the unit.)


3. Use the MIN and SEC buttons to set the time. Press MIN to set minutes and /or hours. Press SEC to seconds .


Hold the MIN or SEC button down for a fast increment .When the minute dlgit Reach 60，it will advance to an hour.


4.If you have set a wrong time， rest (see setp 2)


5.If you have set the correct time ， press the START button once.


NOTE: Once the time has been set ，DO NOT push the TIMER THERMO button ， since it Will cancel the set time .


6.The alarm stand by mode replaces the setting mode the time starts to count down


7.The timer will sound when it counts down to 00:00 00 .


8.Press the STOP button once to stop the alarm.


9.The unit will return to its pre-set position .Your may reset the unit or start again.


10.1.1Meter Sensor wire.


11.Working temperature range for the body.(0~50Degrees Celsius. 32~122 Fahrenheit)


12. Please do not surpass 300 Degrees Celsiusabove object with this test



Packing:with retail packing.

Note:China Post Air Mail reject battery，if you need the battery，please contact with us.