Introducing D-Link DGS-1100-26 MP 26-Port Layer 2 Lite Smart Managed Gigabit Switch

• 24 Port 10/100/1000 Base-T with 2 Gigabit SFP Ports
• Equipped with 802.3az Energy Efficient Ethernet (EEE) Complaint
• Support IEEE 802.1Q VLAN traffic segregation
• Auto Surveillance VLAN for easy integration with IP-based surveillance systems
• Loopback detection (LBD) and broadcast storm control to avoid network downtime
• Quality of Service (QOS) and bandwidth control to ensure smooth operation
• Cable diagnostics function to help troubleshooting wiring problem
• Support Web-based GUI, Smart Console , Network Assistance Utility

The DGS-1100 Series is a range of switches designed to meet the requirements of small, medium, and enterprise businesses. Support for multiple PoE standards, high power budgets and 6 kV surge protection (MP/MPP models) make the DGS-1100 Series ideal for IP surveillance deployments. Advanced management features, a range of diagnostic and troubleshooting tools, and energy efficient technologies provide a flexible solution to your networking requirements.

D-Link Green/Power Saving Performance:
Compliant with IEEE 802.3az Energy Efficient Ethernet, the DGS-1100 Series consume less energy by cutting down on power consumption when port utilization is low. By deploying compatible devices, users can cut operating costs and even cut down on necessary cooling equipment, helping small and medium-sized businesses stay within their budgets. The DGS-1100 Series also features D-Link Green Technology that helps save energy automatically. The switches monitor the link status of every port and significantly reduce power consumption of the interface when there is no link or network traffic detected.

Easy to Deploy:
The DGS-1100 Series supports an intuitive client-based utility (SmartConsole Utility or D-Link Network Assistant Utility) and a web-based managementn interface. The client-based utility discovers all D-Link Smart Switches within the same Layer 2 network segment, making the initial setup quick and easy. This allows extensive switch configuration and basic administration of discovered devices, including password changes and firmware upgrades. The web-based interface provides a user-friendly way for network administrators to manage the switch down to the port level. The interface can be accessed from a web browser, allowing the switch to be controlled from any network-connected PC.

Limited Lifetime Warranty:
D-Link offers a Limited Lifetime Warranty on the DGS-1100 Series Gigabit Smart Managed Switches to further its commitment to product quality and long-term customer confidence.
Auto Surveillance VLAN and Bandwidth Control

The DGS-1100 Series supports Surveillance VLAN for IP surveillance deployments. This gives video traffic a dedicated VLAN and higher priority through the switch, separating surveillance traffic from the rest of the network. This ensures security and guarantees the quality of the video traffic, sparing businesses the added cost of dedicated surveillance hardware. Bandwidth Control can reserve bandwidth on a per port basis for important functions that require larger bandwidth or might have high priority.

Advanced Features:
The DGS-1100 Series is equipped with advanced security features such as Static MAC, Storm Control, and IGMP Snooping. Static MAC allows users to create a MAC whitelist for specific ports, helping administrators limit network access to authorized devices only. Storm Control monitors broadcast, multicast, or unknown unicast traffic and will start blocking or discarding packets which could flood the network when the defined threshold is exceeded. IGMP Snooping is able to reduce the loading of L3 multicast routers and save bandwidth in network throughput.

Easy Troubleshooting:
The DGS-1100 Series features Loopback Detection and Cable Diagnostics to help network administrators find and solve network problems quickly and easily. Loopback Detection is used to detect loops created by a specific port and automatically shuts down the affected port. Cable Diagnostics helps network administrators quickly examine the quality of the copper cables, recognize the cable type, and detect cable errors.

PoE Support:
The DGS-1100-08P/24P/10MP/10MPP/26MP/26MPP provide support for Power over Ethernet (PoE), reducing deployment time for IP cameras, VoIP phones, and access points. Dedicated power adapters are no longer required, as the DGS-1100-24P/10MP/26MP comply with IEEE 802.3af and 802.3at PoE standards and provide up to 30 watts per port. The DGS-1100-08P complieswith the 802.3af standard and provides up to 15.4 watts per port, while the DGS-1100-10MPP/26MPP comply with 802.3af, 802.3at, 802.3bt draft and UPoE and can supply up to 75 watts on a selected number of ports.

Specification

Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity 24
Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000)
SFP module slots quantity 2
DC-in jack Y
Weight & dimensions
Width 440 mm
Depth 290 mm
Height 44 mm
Weight 3.81 kg
Power
AC input voltage 100-240 V
AC input frequency 50/60 Hz
Power consumption (typical) 387 W
Operational conditions
Operating temperature (T-T) -5 - 50 °C
Storage temperature (T-T) -10 - 70 °C
Operating relative humidity (H-H) 0 - 95 %
Storage relative humidity (H-H) 0 - 95 %
Heat dissipation 147046 BTU/h
Networking
Networking standards IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1w, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az
Head-of-line (HOL) blocking Y
IGMP snooping Y
10G support N
VLAN support Y
Port-based VLAN Y
Data transmission
MAC address table 16000 entries
Switching capacity 52 Gbit/s
Throughput 38.69 Mpps
Number of VLANs 4094
Jumbo frames 9216
Security
SSH/SSL support Y
Management features
Switch type Managed
Switch layer L2
Quality of Service (QoS) support Y
Web-based management Y
Design
Rack mounting Y
Form factor 1U
Colour of product Black
LED indicators Y
Ventilation fan(s) 2
Safety cUL, UL, GS, CB
Certification FCC/IC, CE, VCCI, RCM, BSMI
Power over Ethernet (PoE)
Power over Ethernet (PoE) Y
Power over Ethernet (PoE) ports quantity 24
Power over Ethernet (PoE) power per port 370 W
Performance
Flash memory 16 MB
Packet buffer memory 1.5 MB
Mean time between failures (MTBF) 269291 h


Introducing D-Link DGS-1100-26MPP 26-Port Layer 2 Lite Smart Managed Gigabit PoE Switch

• 24 Port 10/100/1000 Base-T PoE Switch with  2  Gigabit Combo  SFP  Ports
• Compliant with IEEE 802.3af(PoE), 802.3at(PoE+)  and 802.3bt(UPoE) Standard
• Equipped with 802.3az Energy Efficient Ethernet (EEE) Complaint
• Support  IEEE 802.1Q VLAN traffic segregation
• Auto Surveillance VLAN for easy integration with IP-based surveillance systems
• Auto-detect  ONVIF devices with Intuitive interface for monitoring and management
• Loopback detection (LBD) and broadcast storm control to avoid network downtime
• Support G.8032 ERPS helps achieve high reliability and network stability
• Quality of Service (QOS) and bandwidth control to ensure smooth operation
• Cable diagnostics function to help troubleshooting wiring problem
• Support Web-based GUI, Smart Console , Network Assistance Utility

The DGS-1100 MP/MPP Series is a range of switches designed to meet the surveillance requirements of small, medium, and enterprise businesses. Support for high-powered Pan Tilt Zoom (PTZ) cameras, an automatic Surveillance VLAN, and 6 kV surge protection make the DGS-1100 MP/MPP Series ideal for IP surveillance deployments. A redesigned interface, a range of diagnostic and troubleshooting tools, and energy efficient technologies provide a flexible solution to your surveillance requirements.

Easy to Deploy:
An interactive setup wizard removes the complexity from installing the switch for the first time. It allows you to choose the web interface mode (Standard or Surveillance), the IP address allocation method (static or DHCP), and the administrator username and password. This completes the initial setup of the switch and automatically configures features such as Loop Detection, DHCP Snooping, SNMP and Surveillance VLAN. An informative quick start guide shows you how to use the network diagram, and a network overview is displayed on the next page. D-Link and 3rd party devices are automatically detected and shown on the network overview page for easy administration.

Surveillance Traffic Optimization:
The DGS-1100 MP/MPP Series supports the automatic Surveillance VLAN feature. This automatically detects surveillance devices and puts them into the Surveillance VLAN, segmenting their traffic from the rest of the network. The ensures security of the data, but also gives the traffic a higher priority through the switch, reducing the chances of the video freezing or being delayed on live streams. A single switch can be used for both surveillance and data networks, removing the need for dedicated surveillance hardware and reducing maintenance costs.

Intuitive Web Interface:
A redesigned Surveillance interface makes surveillance features more accessible than ever. The choice between Standard and Surveillance modes can be made during switch set up, allowing the user to choose the interface that best suits their requirements. A network overview shows which devices are connected to which ports, and ONVIF device support allows the switch to recognize both D-Link and 3rd party IP cameras and Network Video Recorders (NVRs). With monitoring, management, and troubleshooting tools built into a single interface, the DGS-1100 MP/MPP Series provides everything you need to manage your surveillance network.

Maximum Reliability:
The DGS-1100 MP/MPP Series features 6 kV surge protection on all PoE ports to help prevent damage to the network caused by power surges and lightning strikes. Faulty electrical cabling, faulty network cabling, and lightning strikes can cause damage to the switch and connected devices. In-built surge protection of up to 6 kV can limit the damage to the switch from both indoor and outdoor devices and network connections. This increases network reliability, reduces repair costs and removes the need for replacement hardware in the event of an electrical surge or lightning strike.

Easy Troubleshooting:
The DGS-1100 MP/MPP Series features Loopback Detection and Cable Diagnostics to help network administrators find and solve network problems quickly and easily. Loopback Detection detects loops in the network, where multiple devices have been connected to each other and there is a forwarding loop. The switch will identify the port causing the loop and shut the affected port down to avoid network instability. Cable Diagnostics can be used to remotely test the quality of copper cables, recognize the cable type, and detect cable errors.

PoE Support:
The DGS-1100 MP/MPP Series provides support for Power over Ethernet (PoE), reducing deployment time for IP cameras, VoIP phones, and access points. The DGS-1100-10MPP and DGS-1100-26MPP support IEEE 802.3bt, providing up to 75 watts on selected ports for the latest high-powered Pan Tilt Zoom (PTZ) cameras. All switches in the DGS-1100 MP/MPP Series support IEEE 802.3af and 802.3at, providing up to 30 watts per port. This, combined with high power budgets, ensure all of your critical surveillance infrastructure can be powered from a single switch.

Specifications
Hardware Version: Rev B
Number of Ports: 8 x 10/100/1000 and 2 x Gigabit SFP
Port Standard & Functions:   
- IEEE 802.3, 802.3u, 802.3ab compliant
- IEEE 802.3x Flow Control
- IEEE 802.3az EEE compliant
- 802.3af
- 802.3at
-Half/Full-duplex operation at 10/100Mbps
- Full-duplex operation at 1000Mbps
- Auto-Negotiation for each port
- Auto MDI/MDIX

Switching Capacity: 20Gbps
Max. Forwarding Rate: 14.88 Mpps
MAC Address Table Size: 16K Entries
Packet Buffer: 1.5Mbytes
Forwarding Mode: Store and Forward

Power over Ethernet;
PoE Standard:  802.3af/at
PoE Capable Ports: Ports 1-8
PoE Power Budget: 130W
Physical & Environmental
Power Input: 100 to 240 VAC, 50 to 60 Hz
Internal Universal Power Supply
Max. Power Consumption: 141.4 W PoE on; 11.8 W PoE off
Standy Power Consumption: 10. W
Ventilation   One Fan
Acoustics: 45.4 dB(A)
Heat Dissipation: 570.5 BTU/hr
Operating Temperature: 23 to 122 °F (-5 to 50 °C)
Storage Temperature: -40 to 158 °F (-40 to 70 °C)
Operating Humidity: 0% to 95% non-condensing
Storage Humidity: 0% to 95% non-condensing
Dimensions (W x D x H): 11” x 7.1” x 1.73” (280mm x 180mm x 44 mm)
Weight: 4.03 lbs (1.83 kg)

Certifications:
- FCC Class A
- CE Class A 
- VCCI Class ASafety
- UL/cUL
- CE LVD

MTBF: 291,575 Hours

Software Features;
VLAN:
- Port-based VLAN
- 802.1Q Tagged VLAN
- Surveillance VLAN
- Voice VLAN
- Management VLAN
- Asymmetric VLAN (DGS-1100-10MP/-16/-24/-24P/-26MP)

VLAN Group:
- Supports 128 static VLAN groups
- Max. 4094 VIDs

L2 Features;
Flow Control:  
- 802.3x Flow Control
- HOL Blocking Prevention
- Jumbo Frames up to 9216 Bytes

IGMP Snooping:
- IGMPv1/v2 Snooping
- IGMPv3 Awareness
- Supports 64 Groups

802.3ad Link Aggregation:
- 5 groups, 8 ports per group
- G.8032 ERPS~Loopback Detection
- Cable Diagnostics
- LLDP

Port Mirroring :
- One-to-One
- Many-to-One

Statistics:
- Tx Ok
- Tx Error
- Rx Ok
- Rx Error

Spanning Tree Protocol:
- 802.1D STP
- 802.1w RSTP
- SNTP

QoS:
- 802.1p Quality of Service
- 8 queues per port

Queue Handling:
- Strict
- Weighted Round Robin (WRR)
- Deficit Rount Robin (DRR)

Bandwidth Control:
- Port Based
- Ingress: minimum granularity 8 Kbps
- Egress: minimum granularity 64 Kbps

Security:
- D-Link Safeguard
- Traffic Segmentation
- Broadcast/Multicast/Unknown Unicast Storm Control
- DoS Attack Prevention
- SSL

Static MAC Address: Max. 64 entries

Management;
Web-Based GUI:
- Supports IPv4/IPv6
- SNMPv1/v2c
- D-Link Network Assistant Utility

D-Link Green;
Power Saving by:   
- Link Status
- LED Shut-off
- Port Shut-off
- System hibernation
- Compliant with Energy Efficient Ethernet (IEEE 802.3az)
- RoHS Compliant

MIB/RFC Standards:
- RFC 768 UDP
- RFC 791 IP
- RFC 792 ICMP
- RFC 793 TCP
- RFC 826 ARP
- RFC 951 BootP Client
- RFC 1542 BootP/DHCP client
- RFC 2236 IGMP Snooping
- RFC 1213 MIB II
- RFC 1493 Bridge MIB

Optional SFP Transceivers:
- DEM-712 1000BASE-T SFP Transceiver
- DEM-310GT 1000BASE-LX Single-mode Fiber SFP Transceiver
- DEM-311GT 1000BASE-SX Multimode fiber SFP Transceiver