BH-02 Bluetooth headphone Stereo Headphone Stereo Wireless Bluetooth Headset

SPECIFICATIONS

Model no	BH-02	Ver.	Bluetooth V2.1+EDR
Bluetooth Profiles	HSP，HFP，A2DP，AVRCP	Effective Range	10Meters
Music Time	10 Hours	Talk Time	11Hours
Standby Time	Up to 250 Hours	Iuput	DC : 5V/180mAh
Charge Time	3 Hour	Dimensions	14.5106CM

About BH-02

BH-02 is a stereo headset with Bluetooth technology. It supports the following Bluetooth profiles:

HSP —— Headset Profile

HFP —— Hands-free Profile

A2DP—— Advanced Audio Distribution Profile

AVRCP——Audio/Video Remote Control Profile

Overview

Charging the battery with USB cable

Step1: Insert USB charging cable into USB port of PC.
Step2: Connect charging cable with the charging port of headset.
When the red light is on， the headset is charging.
When the blue light is on， the headset is charged fully.
It takes about 3 hours to charge the headset fully.

Warning:

The battery is rechargeable.
First time charging : Before you use this Bluetooth headset， please charge the battery of headset fully

How to use

A Switching on / off headset

Function	Operation	LED indicator	Indication tone
Switch on	Press and hold the MFB for 3 seconds	Blue LED is on for 1 second	“Do Do Do” tone
Switch off	Press and hold the MFB for 6 seconds	Red LED is on for 1 second	“Do Do DO” tone

B Pairing the headset with Bluetooth devices

A) How to enter pairing mode

Be sure BH-02 in power off status first. Press and hold the MFB for 6 seconds， till Red and blue Led blink alternately， or you hear the indication “Do Do” twice come out. And then release the MFB. The unit will become pairing mode.

B) Pairing the headset with Bluetooth mobile phone

Please make sure your mobile phone has Bluetooth function that can be used.

Specific pairing procedures were not the same with different mobile phone. Please refer to your mobile phone manual for further information. Steps as follows:

Please keep the headset and mobile phone in the range of 1 meter when pairing.
Start the Bluetooth function of mobile phone and search the Bluetooth devices.
Make the headset enter into pairing mode (Please refer to “how to enter into pairing mode”).

After searched， select “BH-02”in the Bluetooth device list.

According to indication， enter password or PIN No:”0000”， and press the key of” Yes” or “confirmed”.
After successful pairing， select “BH-02” in the Bluetooth device list， and press “connect”.
After successful connecting， the blue LED of the headset quickly blinks twice or three times every 4 seconds.

Wearing the headset

The string of this headset is retractable， please adjust according to the actual use. Logo “L” of headset represents left ear， Logo “R” of headset represents right ear. Please wear the headset according to the indication of the Logo.

Making calls with the headset