?
  • Specifications

    Main Panel Specifications

    Local Alarm Sound Scale(dB/m)85
    Input Power Supply(V)4.5
    Battery TypeAAA

    Heat/Gas/Smoke Detetor Spec

    Sensor TypeCO
    Power Supply(V)4.5
    Quiescent Current(uA)50
    Battery Life(Year)1
    Operating Temperature(¡ãC)0~50
    Dimensions(L x W x D)(MM)100*38

    Description

    Loud 85 decibel alarm£¬ a permanent carbon monoxide sensor
    The alarm sound pattern is 4 short beeps. The red LED will flash in alarm mode.
    One chirp every 30 seconds indicates that the battery is low (need replacement) (green LED still flashes once every 30 seconds).
    Test/Reset button to test the unit electronics and verifies proper unit operation and reset the unit during CO alarm.
    Alarm memory: If the unit ever alarms£¬ pressing the button£¬ green LED will flash once every second for one minute and the peak alarm level will be indicated on the LCD.
    Green and red LED lights indicate normal operation and alarm status.
    The unit will sound chirp and red LED flashes once as power up.
    Green LED: Flashes every 30 seconds to indicate that the unit is operating properly. The green LED will also flash before CO reading is taken and when any button is pressed.
    Red LED: When a dangerous level of carbon monoxide is detected the red LED will pulse and a loud alarm pattern will sound.
    The carbon monoxide alarm pattern is 4 short beeps£¬ followed by 5 seconds of silence£¬ followed by 4 short beeps with a corresponding red LED flash. This cycle will continue for 4 minutes and then change to 1 cycle every minute until the device is reset or the CO is eliminated.
    Color: White
    Sensor: Electrochemical CO sensor
    Alarm Style: Per EN50291
    Sensitivity/Alarm Time: Within 60~90 minutes at 50ppm CO concentration; Within 10~40 minutes at 100ppm CO concentration; Within 3 minutes at 300ppm CO concentration
    LCD Display (optional): 4 digits
    Audibility: 85dB (at 1m distance)£¬ Frequency 3-0.5KHZ
    Standby Current: less than 50¦ÌA
    Alarm Current: less than 50mA
    Standby Mode: Green LED flashes once every 30 seconds
    Alarm Mode: Red LED quickly flashes 4 times with unit chirping every 5 seconds£¬ then repeat
    Low-bat Indicator: Chirp every 30 seconds as battery lower than 3.3V with green LED flashing and "Lb" on LCD
    Power consumption: 0.3mW
    Size: 10 x 10 x 3.5 cm
    Power Supply: 3 x AA Batteries (not included)
    1 x Main unit
    1 x English user guide
    1 x Screws kit
    In original package

    Detail Photos