Item Descriptions:

[Improved version of Black Bicycle Light]

Unlike other manufacturer's touch sensor type road bike light, it improves the switch and becomes button switch type.

There is no erroneous operation by accidental touch.

You can operate it by wearing the glove in winter.

(It is easy to push with the nail)

【Brightness】

【Adopt 1200 lumen LED light】

1. If it is a 1200 lumen bicycle light, dark night roads and signs will also illuminate brightly.

2. I have three modes, so I can switch according to road conditions.

Cheap at commuting or school attendance It is light of heart.

3. Strong mode: 1200 lumens Weak mode: 300 lumens.

It is about 3.5 to 6 hours when using at the maximum light intensity.

It is about 6 hours when using in low mode.

【Charging method】

1. Connect the light body and a commercially available USB charger or mobile power battery only with a USB cable for energization.

2. The light indicator lights red and charging begins.

The indicator lights green and charging is completed.

3. The indication lamp will light red when the battery level becomes low.

Charging time: It is around 4 to 5.5 hours from the electric shortage condition to full charge.

Complete while sleeping.

The USB charger is 500 mA.

The package does not include a charger, it can charge with a general smartphone charger.

【After Sales Service】

If you have any inquiries or inquiries about the items delivered, please do not hesitate to contact us.

We will provide solutions as soon as possible, most inquiries can be handled within an hour, except on weekends and holidays, we will respond more carefully than in charge in principle within 24 hours.

【Headlight operation method】

Each time the button is pressed, the mode changes from strong to weak to blink.

1. Lights when the button is pressed once

2. Each time the button is pressed, repeat strong → weak → blink

※ Do not operate the switch while cycling.

【Tail light operation method】

1. Before using the taillight please remove the protective paper of the inside of the battery.

2. You can switch the 3 modes by pressing the tail light.

(Lit / fast blinking / slow blinking)

【How to use holder】

This product comes with a holder for fixing on the bicycle.

The connection to the bicycle is easy, just hold the holder in an arbitrary place and tighten the screw at the bottom.

Fixing the light to the holder is easier and you can use it as a light for a bicycle just by inserting the main body into the holder until it says "click".

A helmet holder is also included and can be used as a helmet light.

【Notes】

* When you leave the bicycle to prevent theft, we recommend that you remove the main unit.

* For use with flashing it can not be used as a bicycle headlamp.

* To avoid burns, do not touch the cap when using it for a long time or just after using it for a long time.

※ To guarantee the battery life, please charge as soon as the battery runs out.

Please charge it fully when not using for a long time.

※ Because waterproof is not a diving design, please do not soak in water, please wipe off moisture well after use in rainy weather.

【Package Contents】

Bicycle headlight LED

Tail light LED

Handle fixing holder

Helmet fixing holder

Velcro tape band for helmet

USB charging cable, strap

Japanese Instruction Manual

Features:

• 【★★★ Attention to fakes ★ ★ ★ "TechBay JP" is the only authorized seller.
• Please be careful!
• Unlike other manufacturer's touch sensor type road bike light, it improves the switch and becomes a button switch type (easy to push with the nail).
• There is no erroneous operation by accidental touch.
• You can operate it by wearing the glove in winter.
• The output of the high brightness white LED bulb is 1200 lumens.
• Compared to the general road bike light of 80 to 180 lumens, it is many times brighter, safe for night driving!
• IP67 standard waterproof / dustproof type road bike light, can be used in bad weather.
• [USB Rechargeable & 2000mAh Large Capacity Battery] The bicycle light is 3.5 to 6 hours (tested) when it is used at the maximum light intensity.
• It is about 6 hours (tested) when using in low mode.
• Since the bicycle head light is a USB rechargeable type, it can be recharged repeatedly, battery replacement is unnecessary, tail light is a button type battery.
• [Easy to install] Two types of holders for bicycles and helmets are attached, and if it is installed correctly, it will not fall off even with a bad road shock, tool is unnecessary for installation.
• Non-slip rubber mat with thickness of about 5 mm / 3 mm is also included.
• Diameter correspondence range is 40mm ~ 20mm, that is, it corresponds to the bicycle within the circumference 62.8mm ~ 125.6mm.
• [Control explanation + multifunctionality] Bicycle front light is button type easy operation, you can switch 3 modes by pressing ON / OFF button (strong 1200 lumens · weak 300 lumens · flashing), bonus tail
• Light is also possible to switch 3 modes (lit, fast blinking, slow flashing).
• 【Package Contents + Manufacturer Warranty】 LED Bicycle Light, LED Tail Light, Handle Holder, Helmet Holder, Magic Tape Band, Strap, USB Charging Cable, Japanese Instruction Manual.
• The button type now is the first release with an improved product based on customer guidance / indication.
• Recently it is thought that the possibility of a malicious review by another company is high due to competition in the same industry.
• Please note.
• Our bicycle light made a 100% inspection before shipment, please purchase with confidence.
• Since 12 months manufacturer's warranty comes after purchase, please feel free to contact our company if you have any noticeable points or inquiries during use.

Product information:

Shipping Weight: 272 g

Package Dimensions: 5.31 x 15.39 x 15.49 cm