Introduction:
It is a metal cased, anti-vandal, standalone controller, with built-in proximity card reader module and keypad. When press key or read card, the key value or card number will be sent out via wiegand interface. It is great for high traffic and extremely harsh environments, the unit is fully sealed, epoxy filled, advanced programming options as well as flexible operation models.
Feature:
- With one built-in EM (JAC117E) or HID(JAC117H) card reader module, 1000 users capacity
- Open door with 3 models: PIN only, Prox only and Prox+PIN
- Enroll/delete card by keypad or master card, master can be made by user
- Delete card by input card number from keypad directly
- One external Wiegand26 interface, may use JAC117 with different RFID technology.
- Optical Tamp detection and buzzer alarm function.
- Door release time from 1 to 25.5 seconds
- Full potting with epoxy, IP65 waterproof
- 1000V Surge protection, 2000V ESD protection hardware design
Specification:
Power requirements: 7-36 VDC at 100 mA, A linear regulator is recommended
Reader range: Up to 80 mm
Frequency: 125KHz
Working temperature: -20 degrees Celsius to 70 degrees Celsius
Working humidity: 5%-95% relative humidity non-condensing
Audio/Visual indication: Green & Red and Buzzer signal output
Output relay: 3A , Dry C type
Input: One external wiegand reader, one push button
Size: 120 x 58 x 20 mm
Weight: 500g
1 x Door Access Control Keypad
2 x Fixing Screws
1 x Iron Rod
1 x User Manual
In original package
