Somewhat

Attaching lips to the tumbler will touch the outer container, so people concerned need to clean the outer container each time. I wanted a little more contrivance about this neighborhood. Where you hold the hands of the main body is slightly thinner, it is easy to hold. The insulation and keeping capacity seems to be insulation effect (1 hour) 47 degrees or more, cold insulation efficacy (1 hour) 9 degrees or less, but I tried putting hot water in hot water. -> 78.2 ° C (after 5 minutes) -> 72.2 ° C (after 10 minutes) -> 65.2 ° C (after 20 minutes) -> 59.4 ° C (after 30 minutes) -> 55.1 ° C (40 It was a minute later). I think that is reasonable.

It is indeed hard to cool down

I think that it is good to think that you have to drink coffee that is cold over time with a drink coffee. However, when washing, the problem is that the inner plastic cup should dry out or wipe off moisture. It is Okaaku.

As I expected!

The microwave oven has been made and it can keep warm without peeling even when it goes to a dishwasher! If there is a handle, it may have been better.

Heat with microwave OK

When drinking a cold drink with a vacuum insulation type cup, condensation does not occur and the coldness lasts for a long time and it is comfortable, but when you drink a hot drink, because you can not use a microwave oven, want to warm pet drinks etc. In case you can not help using a microwavable container. It is troublesome to warm up with a microwave oven compatible container and to transfer it, so that the vacuum insulation cup is limited only for cold drinks eventually or even for hot drinks at most to the extent of granule instant drinks, and in this case as well You must boil water. However, since this cup can separate the outer stainless steel vacuum insulation part and the inner resin cup part, it is a translation that can easily warm your favorite beverage if you hang the inside only with a microwave oven. I usually warm the microwave oven with potless handless cups, but since it gets hot as a whole including ceramics, it will become a difficulty with a bottom or mouth that is hard to get hot without any help. In this product, even if the inside is hot, the outside vacuum insulation part will not get hot at all, so you can drink a drink comfortably despite having no possession. It seems that the heat retention is somewhat inferior to the cold insulation, but it still keeps warmth for a long time compared to the usual pot-made cup. After that, if there is something more chic in color, it will be more noticed. Personally, I think that it is a product that was well made inside.

The function you were looking for exactly.

I've been making hot cocoa using a cup of pottery in a microwave oven, but I was dissatisfied with getting cold soon. Even though putting it in an ordinary stainless steel insulation cup boiled milk in a pot or the like too, washing things increase and it is bought ... That is why I was considering purchasing an insulated tumbler which can be warmed in the range from before, but carelessly I could not get a hand on the double insulated tumbler of glass or pottery that might break. This item was exactly the ideal thing so I jumped. First of all, although I bought an ivory as an appearance, I like the outer white paint in an atmosphere like an enamel and a warm feeling with the shape that the lower part is full of. The structure is divided into a stainless steel vacuum double structure body, a range OK plastic inner container, and a packing (the second gray product photo) set on the outside of the inner container. Both the main body and the inner container are easy to wash and packing is easy to install and remove so it is clean. The packing is put in a microwave oven with it being made of silicon. It is possible to separately purchase replacement parts guidance in the instruction manual, contents container set is 500 yen for tax and inner container packing for 200 yen for tax. Usability is as expected and it is very good. It seems to be somewhat inferior to ordinary stainless steel objects, but keeping the temperature for a much longer time than ordinary cups which are still warmed in the range of plastic, pottery, glass, etc. I will. You will not have any dissatisfaction with the time to finish drinking at least this size. One thing I was dissatisfied with was that it was hard to peel off the sticker on the outer container. Although it is stated that the seal on the bottom side is stuck one by one on the side and the bottom, it is in the instruction (it is that there is a possibility of the cold insulation and warming effect decreasing) It should be good to peel off The side seal was hard to peel off, and glue remained and it was troublesome to clean up cleanly. Do not overdo it I will peel off the seal peeling liquid or dishwasher detergent beforehand by wrapping in advance and leave it for 10 minutes without leaving anything. --------------- Although we are totally satisfied with comprehensiveness, we request the following etc. I think that it is convenient to use various things more than now that it has become a structure of a drinking mouth which is easy to use even with the outer cup. I would be happy if it will be deployed in series with various things such as those with lid and more capacity.

I was waiting for such a product.

Those of the thermos bottle type can not be used in a microwave oven or a dishwasher, it is hard to wash and it molds immediately, and some spots remain even when washed. It can also be used in microwave oven and dishwasher, easy to wash! And you can keep warmth, stability is high and it is difficult to overturn. I think that it is a wonderful item. Actually, the chance to learn about this product was the inventory disposition section of the nearby home center. When I looked it up at Amazon, I purchased it as being perfect for my intended use. If you mention dare to say that it is disadvantageous, is there a point where there is no lid and does not enter the car cup holder? If you have a lidded one, or a commodity that allows you to push a coffee cup of a convenience store directly, I would like it for inside the car.

It is warmer than I thought

It will keep you warm well up to about 30 minutes. I was betting without expectation, but I am very satisfied. With this I sold a special lid as an option, so it will not have to say that it will finally last for about 1 to 2 hours as a result.