Characteristic index:
The maximum equivalent sampling rate of 20MSa/s
The real-time sampling rate of 2Msps
The accuracy of 8Bit
Sampling depth: 256 byte buffer
Simulation of frequency band width of 0 1MHz
Vertical sensitivity of 100mV/Div - 5V/Div (progressive by 1-2-5)
The vertical displacement is adjustable， with instructions
Input impedance 1M
Maximum input voltage: 50VpK (peak)
Coupling DC/AC
Horizontal sweep range: 0.2 s/Div - 10m (min) /Div (progressive by 1-2-5)
With automatic， conventional and single trigger mode， easy to capture transient waveform
Selection of internal / external trigger source
Available rising or falling edge trigger
Trigger level position can be adjusted， with instructions
Observable trigger before the wave (Fu Yanchi)
A trigger output， can be more than one oscilloscope connected in series to achieve the multichannel measurement， or other instrument used for synchronization.
May at any time to freeze the waveform display (HOLD)
With the 500Hz/5Vpp test signal
Can be stored up to 6 groups of waveform， the shutdown is not lost
Can facilitate the transfer of stored waveform display
The display screen in the form of graphics files sent through the serial port to the PC machine
Meter can measure frequency up to 5MHz frequency
A 256/512 FFT function， the signal spectrum analysis
Product display:
