tSpecifications:
t1.Product Size:127*25mm (5*0.99inch)
2.Cable Length:60cm(23.62inch)
tProduct Features:
1: Video power supply with two solid capacitors, make more stable and secure power supply card.
2: Interface adapter with a small 4PIN strengthen power supply, so the graphics power independent from the motherboard, so that when connected to multiple graphics cards to reduce the burden on the motherboard. (Optional big 4PIN SATA power lines or power lines)
3: using imported graphics slot connector, better graphics and connector contacts.
4: PCI-E connector multi-layer shielded wire, can take up to 3M without attenuating the signal.
5: USB wire soft and stable, easy to take the line graphics and can be positioned.
6: Slot with retaining tabs, easier disassembly and fixed graphics card, video card does not fall from the slot.
7: wire adopts the most stable mining factory pumping wire (that one on the Confidential), to ensure the integrity of the signal.
8: black and blue thick line on the market hard and rough, bad alignment, but the quality did quite poor, so there will be very unstable phenomenon, please understand. (Not all the lines can be used for mining)
9: Power lines using copper wire thick line when the firing line to avoid mining, support inspection, fake a lose ten
Precautions:
1. This extension cable is suitable for the motherboard PCI-E slot (1X, 2X, 4X, 8X, 16X). Plug in the power cord when you use the floppy drive. When plug PCI-E extension cable must be re-plug the computer power cord, be sure to see precautions when using!
2. The supporting wire is customized, please do not just look for the line to plug in!
It must recognize the direction 3. Plug, plug not inserted backwards or deviation, to prevent the burning device, then plug socket to hold the line when the device plug wire, avoid excessive force general interrupt pin socket.
4. The dual-core graphics card is recommended to use the old cable, 16X motherboards are also recommended to use the old cable!