PRODUCT NAME
Cell Phone Signal Booster - Mingcoll 850MHz ATT Verizon GSM 2G 3G CDMA Amplifier Mobile Repeater Inc
PRODUCT CODE: PROD1830121229
PRODUCT INFORMATION
Work with all 2G 3G 850MHz (Band 5) data service and voice service
Improves the voice quality and faster 2G 3G in your home,office,villa,garage,basement and so on
The installation requires no technical experience,it is very easy to install
It is better to determine the exact in different location until the highest signal strength is received on your phone(most amount of bars). Once you ascertain the best location then permanently mount the outdoor antenna.Keep the distance between the outdoor antenna and indoor antenna should be above 22ft and make sure a proper amount of physical separation between outdoor antenna and indoor antenna.These things are absolutely critical for this booster to work
FCC Certificate


Technical Details


Product Details

Package Dimensions
Width : 7.9 inch
Height : 5.1 inch
Length : 16.2 inch

Shipping Weight: 4.1 pounds (View shipping rates and policies)

ASIN : B01IVJ8SIM


Product Description

Before order, please make sure your SIM card support 850MHz frequency.

Specification :
This Signal Band Repeater is designed for 850MHZ Cellular Band
Operation Frequency:824-849MHz(Uplink),869-894(Downlink)
Emission Designator:CDMA(F9W),WCDMA(F9W)
AGC LEVEL:Uplink:-44.00 Downlink:-56.00
Max.Antenna Gain:Uplink:7.9dBi Downlink:6.6dBi
FCC Classification:B2W/Wideband Consumer Booster(CMRS)

Package contents :
Signal Booster
Outdoor Yagi Antenna
Indoor Panel Antenna
32ft coaxial cable
16ft coaxial cable
Screws for Mounting
User Manual

Guarantee:
FCC authentication certificate

Installation Guide:
1.Tightly connect the 32ft coaxial cable to the outdoor yagi antenna
2.Check and find a place where your cell phone can receive the best signal outside your house,then mount the outdoor Directional Yagi Antenna and keep the Outdoor Yaigi Antenna towards the cell phone signal tower
3.Mount the signal booster device somewhere inside the house,the signal booster should be fixed in a place where is near from the power socket,and have good ventilation.
4.Tightly connect the 32ft coaxial cable to the OUTDOOR port of the signal booster.
5.Tightly connect the 16ft coaxial cable to the Indoor Antenna and the INDOOR port of the signal booster.
850MHz 3G 2G