Product Description:

 

Name: Universal LED mirror lights, mirror Bumper

 

Voltage: DC-12V

 

Color: blue yellow

 

Dimensions: 16.5X2.5cm

 

Weight: 6.64

 

 

 

Features:

1. Use a flexible circuit board and 3M adhesive on the back, can be installed in the rear-view mirror has a curvature of the surface, may need to be properly installed according to bend;

2. You can take a turn lights or small lamp;

3. high temperature, waterproof material, durable;

4. Use the ultra-thin, ultra-bright LED;

5. Environmental protection, low power consumption, high brightness, easy installation, a variety of models GM;

 

 

Installation instructions:

 

Method (a): the mirror must be removed

1. The first product is the same as the mirror bent arc.

2. Then forced posted up.

3. Remove the car tripod.

4. Loose screws, remove the mirror.

5. The wire through the hole from the tripod into the car.

6. The use of double-sided adhesive fixed wires underneath the mirror, it is not easy to see the wires.

7. Use the wires to the engine room void, connected in a small lamp.

8. Perfect installation.

Method (b): Does not have to split the mirror

1. The first product is the same as the mirror bent arc.

2. Then forced posted up.

3. The use of double-sided adhesive fixed wires underneath the mirror, it is not easy to see the wires.

4. Wire affixed to the door along the side mirror.

5. Use the wires to the engine room void, connected in a small lamp.

6. Perfect installation.

7. Can still be seen from the rear lights.

8. Perfect installation.

 

Look at the following picture of it, it is quite good pliability, strong double-sided adhesive on the back of the whole is ly secure!