Main Features:
● High efficiency, long life and high reliability
● Low ripple, high efficiency
● low operation temperature and long performance life
● Input voltage, suitable for the world standard
● Excellent insulation property, high dielectric strength
● 100% full-load burning test

Specifications
Specification
Wattage (W): >350
Product weight: 0.805 kg
Package weight: 0.860 kg
Product size (L x W x H): 21.5 x 11.5 x 5 cm / 8.45 x 4.52 x 1.97 inches
Package size (L x W x H): 23 x 13 x 6 cm / 9.04 x 5.11 x 2.36 inches
Package Contents: 1 x Switching Power Supply

Detailed parameters
型Model
S-360-36

Input
AC input voltage range (V)
AC 100V-120V / 200V-240V (switch replacement)

AC Input current(max)
6.5A/115V,4A/230V

Frequency (Hz)
47Hz～63Hz

Efficiency
82% Typ(230V full load)

Inrush current(A)
Current 25A/115V 50A/230V cold start

Leakage current(mA)
<3.5mA/AC240V

Output
Output Voltage(V)
36VDC

Voltage Regulation
± 10%

Output Current(A)
10A

Current Range (A)
0～10A

Rated Power(W)
360W

Start time,hold-up time(ms)
Ton≤200ms,Td≥30ms 230V full load

Rise time(ms)
Typ:100ms 230Vfull load

Ripple/Noise(mVp-p)
150mVp-p

Environment

Working temperature (Deg.C)
-40- 65(refer derating curve)

Storage Temperature(Deg.C)
-20- 60

Humidity
20% - 90% RH non condensing

Protection

Over voltage protection
>115%-135% rated output voltage（13.8-16.2V）

Over load protection
>105%-150% Auto recovery

Short circuit protection
Latched

In orderto ensure the safety of human use, before installation, please note:
1. Select the correct input voltage and the input and output connection method.
2. Do not peel off the power before installing a protective layer to prevent foreign matter falling into the lead when the power supply is damaged.
3. After installation please tear in addition to the protective layer, so as not to affect the power cooling.
4. To avoid electric shock, do not disassemble the power supply chassis.
 Product installation instructions:
1, the installation, use a length of less than 4mm screw fixing the power supply reliability.
2, before the installed power run, check and proofread each wiring terminals on, make sure the input and output, AC and DC, positive and negative voltage
And current values such as the right to eliminate wrong connection reverse phenomenon, to avoid damage to the power supply and user equipment.
3. Use a multimeter to measure power before hot, neutral and ground short circuit, the output is shorted; load when power is the best start.
4. Do not exceed the power supply when using the nominal value, so as not to affect the reliability of the product. To change the power supply output parameters, the power supply to the customer before using our technical
Surgery department consulted to ensure the use of the product and reliability.
5, in order to ensure the safety and reduce the use of interference, ensure reliable grounding ground (grounding wire more than AWG18 #).
6, in order to extend the life of power, our company can provide duct design solutions.
7. Do not frequent switching power supply, or affect their life.
8, such as power failure, please do not repair them, please contact the company as soon as possible to resolve.