Positioned to compete with other metal bathroom options. Command’s metal bathroom range not only retains the brand’s USP of strong holding and clean removal, it’s also made of the highest grade stainless steel making it a superior option to competition in the market

1. Multi-Purpose Hook Bar 17676B - Holds up to 3kg

Includes:

1 x Multi-Purpose Hook Bar
4 x Large Adhesive Strips
1 x Adhesive Cleaning Sheet

Product Description:

Keeps your spatulas, ladles, whisks and other cooking tools neatly organized

Do not exert force when removing the cooking tools to prevent the hook bar from damage, affecting the bond between the wall and the strips

High-strength adhesive works great on a variety of surfaces - tile, fiberglass, painted surfaces, finished wood, mirrors and more

Slowly pull the tab straight down for damage-free removal from surface

One bar holds 3KG

To apply kitchen towel rack:

1. Clean & Dry Surface
Step A: Clean, wipe wall and dry.
Step B: Tear adhesive cleaning foil along the dotted line. Avoid hand contact with sheet.
Step C: Apply the adhesive cleaning sheet to the intended position of the strip in a downward direction and let it stand for 5 minutes. Make sure the wall is dry before proceeding to step 2.
*Note: Do not remove sheet from foil and avoid hand contact with cleaning sheet. Rinse with water immediately if in contact with skin.

2. Seperate & Apply strip
Two strips will go on each mounting base. Seperate strips. Remove red Command strip liner. Align square end of strip with solid line on top of mounting base. Placing one strip on each side of the dotted lines. Remove black "wall side" liners.

3. Position & Press Firmly
Position rack horizontally and press the entire rack firmly against surface for 30 seconds.
Caution: Place rack in accessible position for removal by ensuring tab can stretch at least 20cm downwards upon removal

4. For optimal holding strength
Remove rack by sliding it upwards to remove from mounting bases. Remove gently to avoid scratching the surfaces.

5. Press firmly
Use your palm to firmly press each of the mounting bases along the length of the strip for at least 30 seconds.
Note: If mounting in moist areas, especially on ceramic tile or glass, wait 24 hours to allow adhesive to bond before use.

6. Attach rack
Slide rack back onto mounting bases, pushing it all the way down until it snaps into place.

To remove:
1. Slide rack r off bases
Hold rack lightly as shown and slide upwards to remove rack from bases

2. Remove strip
To prevent mounting base from snapping your fingers, hold the base lighly as shown, DO NOT press against base against wall. SLOWLY slide tab STRAIGHT DOWN AGAINST THE WALL stretching strip at least 20cm until mounting bases releases from the wall.
Note: NEVER pull strip out at an angle. Strip could break or damage surface.

2. Towel Bar 17672B - Holds up to 3kg

Includes:

1 x Towel Bar
4 x Large Adhesive Strips
1 x Adhesive Cleaning Sheet

Product Description:

Hangs a variety of towels, bath towels and gloves

Do not exert force when removing the towels to prevent the towel bar from damage, affecting the bond between the wall and the strips

High-strength adhesive works great on a variety of surfaces - tile, fiberglass, painted surfaces, finished wood, mirrors and more

Slowly pull the tab straight down for damage-free removal from surface

One bar holds 3KG

To apply towel bar:

1. Clean & Dry Surface
Step A: Clean, wipe wall and dry.
Step B: Tear adhesive cleaning foil along the dotted line. Avoid hand contact with sheet.
Step C: Apply the adhesive cleaning sheet to the intended position of the strip in a downward direction and let it stand for 5 minutes. Make sure the wall is dry before proceeding to step 2.
*Note: Do not remove sheet from foil and avoid hand contact with cleaning sheet. Rinse with water immediately if in contact with skin.

2. Seperate & Apply strip
Two strips will go on each mounting base. Remove red Command strip liner. Align square end of strip with solid line on top of mounting base. Placing one strip on each side of the dotted liines. Remove black "wall side" liners.

3. Position & Press Firmly
Position towel bar horizontally and press the entire towel bar firmly against surface for 30 seconds.
Caution: Place towel bar in accessible position for removal by ensuring tab can stretch at least 20cm downwards upon removal

4. For optimal holding strength
Remove towel bar by sliding it upwards to remove from mounting bases. Remove gently to avoid scratching the surfaces.

5. Press firmly
Use your palm to firmly press each of the mounting bases along the length of the strip for at least 30 seconds.
Note: If mounting in moist areas, especially on ceramic tile or glass, wait 24 hours to allow adhesive to bond before use.

6. Attach towel bar
Slide towel bar back onto mounting bases, pushing it all the way down until it snaps into place.

To remove:

1. Hold Towel Bar lightly as shown and slide upwards to remove Towel Bar from bases

2. Remove strip
To prevent mounting base from snapping your fingers, hold the base lighly as shown. DO NOT press against base against wall. SLOWLY slide tab STRAIGHT DOWN AGAINST THE WALL stretching strip at least 20cm until mounting bases releases from the wall.
Note: NEVER pull strip out at an angle. Strip could break or damage surface.

Includes:

1 x Shower Caddy
4 x Large Adhesive Strips
1 x Adhesive Cleaning Sheet

Product Description:

Holds your shampoo, shower gels and other cleaning supplies scurely

Do not exert strength when dispensing

High-strength adhesive works great on a variety of surfaces - tile, fiberglass, painted surfaces, finished wood, mirrors and more

Slowly pull the tab straight down for damage-free removal from surface

One bar holds 3KG

To apply shower caddy:

1. Clean & Dry Surface
Step A: Clean, wipe wall and dry.
Step B: Tear adhesive cleaning foil along the dotted line. Avoid hand contact with sheet.
Step C: Apply the adhesive cleaning sheet to the intended position of the strip in a downward direction and let it stand for 5 minutes. Make sure the wall is dry before proceeding to step 2.
*Note: Do not remove sheet from foil and avoid hand contact with cleaning sheet. Rinse with water immediately if in contact with skin.

2. Seperate & Apply strip
Two strips will go on each mounting base. Seperate strips. Remove red command strip liners. Align square end of strips with sold line on top of mounting base. Placing one strip on each side of the dotted lines. Remove black "wall side" liners.

3. Position & Press Firmly
Position caddy horizontally and press the entire caddy firmly against surface for 30 seconds.
Caution: Place caddy in accessible position for removal by ensuring tab can stretch at least 20cm downwards upon removal

4. For optimal holding strength
Remove caddy by sliding it upwards to remove from mounting bases. Remove gently to avoid scratching the surfaces.

5. Press firmly
Use your palm to firmly press each of the mounting bases along the length of the strip for at least 30 seconds.
Note: If mounting in moist areas, especially on ceramic tile or glass, wait 24 hours to allow adhesive to bond before use.

6. Attach caddy
Slide caddy back onto mounting bases, pushing it all the way down until it snaps into place.

To remove:
1. Slide caddy off bases
Hold caddy lightly as shown and slide upwards to remove caddy from bases

2. Remove strip
To prevent mounting base from snapping your fingers, hold the base lighly as shown, DO NOT press against base against wall. SLOWLY slide tab STRAIGHT DOWN AGAINST THE WALL stretching strip at least 20cm until mounting bases releases from the wall.
Note: NEVER pull strip out at an angle. Strip could break or damage surface.

Includes:

1 x Spice Rack
4 x Large Adhesive Strips
1 x Adhesive Cleaning Sheet

Product Description:

Keeps your seasonings like salt, sugar and pepper neatly arranged on the tray for easy reach and convenience

The tray can be easily removed for cleaning

Detach the tray from the mounting base, wash and attach it back

High-strength adhesive works great on a variety of surfaces - tile, fiberglass, painted surfaces, finished wood, mirrors and more

Slowly pull the tab straight down for damage-free removal from surface

One bar holds 3KG

To apply spice rack:

1. Clean & Dry Surface

Step A: Clean, wipe wall and dry.
Step B: Tear adhesive cleaning foil along the dotted line. Avoid hand contact with sheet.
Step C: Apply the adhesive cleaning sheet to the intended position of the strip in a downward direction and let it stand for 5 minutes. Make sure the wall is dry before proceeding to step 2.
*Note: Do not remove sheet from foil and avoid hand contact with cleaning sheet. Rinse with water immediately if in contact with skin.

2. Seperate & Apply strip
Two strips will go on each mounting base. Remove red Command strip liner. Align square end of strip with solid line on top of mounting base. Placing one strip on each side of the dotted liines. Remove black "wall side" liners.

3. Position & Press Firmly
Position rack horizontally and press the entire dish firmly against surface for 30 seconds.
Caution: Place rack in accessible position for removal by ensuring tab can stretch at least 20cm downwards upon removal

4. For optimal holding strength
Remove rack by sliding it upwards to remove from mounting bases. Remove gently to avoid scratching the surfaces.

5. Press firmly
Use your palm to firmly press each of the mounting bases along the length of the strip for at least 30 seconds.
Note: If mounting in moist areas, especially on ceramic tile or glass, wait 24 hours to allow adhesive to bond before use.

6. Attach rack
Slide rack back onto mounting bases, pushing it all the way down until it snaps into place.

To remove:

1. Slide rack off bases
Hold rack lightly as shown and slide upwards to remove rack from bases.

2. Remove strip
To prevent mounting base from snapping your fingers, hold the base lighly as shown, DO NOT press against base against wall. SLOWLY slide tab STRAIGHT DOWN AGAINST THE WALL stretching strip at least 20cm until mounting bases releases from the wall.
Note: NEVER pull strip out at an angle. Strip could break or damage surface.

5. Towel Rack 17678B - Holds up to 1kg

Includes:

1 x Kitchen Towel Rack
4 x Large Adhesive Strips
1 x Adhesive Cleaning Sheet

Product Description:

Allows you to place most kitchen towel rolls for easier tear and dispensing

High-strength adhesive works great on a variety of surfaces - tile, fiberglass, painted surfaces, finished wood, mirrors and more

Slowly pull the tab straight down for damage-free removal from surface

One bar holds 1KG

To apply kitchen towel rack:

1. Clean & Dry Surface
Step A: Clean, wipe wall and dry.
Step B: Tear adhesive cleaning foil along the dotted line. Avoid hand contact with sheet.
Step C: Apply the adhesive cleaning sheet to the intended position of the strip in a downward direction and let it stand for 5 minutes. Make sure the wall is dry before proceeding to step 2.
*Note: Do not remove sheet from foil and avoid hand contact with cleaning sheet. Rinse with water immediately if in contact with skin.

2. Seperate & Apply strip
Two strips will go on each mounting base. Seperate strips. Remove red Command strip liner. Align square end of strip with solid line on top of mounting base. Placing one strip on each side of the dotted lines. Remove black "wall side" liners.

3. Position & Press Firmly
Position rack horizontally and press the entire rack firmly against surface for 30 seconds.
Caution: Place rack in accessible position for removal by ensuring tab can stretch at least 20cm downwards upon removal

4. For optimal holding strength
Remove rack by sliding it upwards to remove from mounting bases. Remove gently to avoid scratching the surfaces.

5. Press firmly
Use your palm to firmly press each of the mounting bases along the length of the strip for at least 30 seconds.
Note: If mounting in moist areas, especially on ceramic tile or glass, wait 24 hours to allow adhesive to bond before use.

6. Attach rack
Slide rack back onto mounting bases, pushing it all the way down until it snaps into place.

To remove:
1. Slide rack r off bases
Hold rack lightly as shown and slide upwards to remove rack from bases

2. Remove strip
To prevent mounting base from snapping your fingers, hold the base lighly as shown, DO NOT press against base against wall. SLOWLY slide tab STRAIGHT DOWN AGAINST THE WALL stretching strip at least 20cm until mounting bases releases from the wall.
Note: NEVER pull strip out at an angle. Strip could break or damage surface.

6. Soap Dish 17675B - Holds up to 1kg

Includes:

1 x Soap Dish
1 x Large Adhesive Strip
1 x Adhesive Cleaning Sheet

Product Description:

Allows you to place the soap on the tray

Please clean the drian pan regularly

1 dish holds 1kg

To apply soap dish:

1. Clean & Dry Surface
Step A: Clean, wipe wall and dry.
Step B: Tear adhesive cleaning foil along the dotted line. Avoid hand contact with sheet.
Step C: Apply the adhesive cleaning sheet to the intended position of the strip in a downward direction and let it stand for 5 minutes. Make sure the wall is dry before proceeding to step 2.
*Note: Do not remove sheet from foil and avoid hand contact with cleaning sheet. Rinse with water immediately if in contact with skin.

2. Seperate & Apply strip
One strip will go on the mounting base. Remove red Command strip liner. Align square end of strip with solid line on top of mounting base. Remove black "wall side" liner.

3. Position & Press Firmly
Position dish horizontally and press the entire dish firmly against surface for 30 seconds.
Caution: Place dish in accessible position for removal by ensuring tab can stretch at least 20cm downwards upon removal

4. For optimal holding strength
Remove dish by sliding it upwards to remove from mounting bases. Remove gently to avoid scratching the surfaces.

5. Press firmly
Use your palm to firmly press each of the mounting bases along the length of the strip for at least 30 seconds.
Note: If mounting in moist areas, especially on ceramic tile or glass, wait 24 hours to allow adhesive to bond before use.

6. Attach dish
Slide dish back onto mounting bases, pushing it all the way down until it snaps into place.

To remove:
1. Slide dish off bases
Hold dish lightly as shown and slide upwards to remove dish from bases

2. Remove strip
To prevent mounting base from snapping your fingers, hold the base lighly as shown, DO NOT press against base against wall. SLOWLY slide tab STRAIGHT DOWN AGAINST THE WALL stretching strip at least 20cm until mounting bases releases from the wall.
Note: NEVER pull strip out at an angle. Strip could break or damage surface.

7. Sponge Holder 17679B - Holds up to 1kg

Includes:

1 x Sponge Holder
1x Large Adhesive Strip
1 x Adhesive Cleaning Sheet

Product Description:

To hold sponge

One bar holds 1KG

Large water resistant strips which allow for usage on wet surfaces included

To apply Sponge holder:

1. Clean & Dry Surface
Step A: Clean, wipe wall and dry.
Step B: Tear adhesive cleaning foil along the dotted line. Avoid hand contact with sheet.
Step C: Apply the adhesive cleaning sheet to the intended position of the strip in a downward direction and let it stand for 5 minutes. Make sure the wall is dry before proceeding to step 2.
*Note: Do not remove sheet from foil and avoid hand contact with cleaning sheet. Rinse with water immediately if in contact with skin.

2. Seperate & Apply strip
One strip will go on the mounting base. Remove red Command strip liner. Align square end of strip with solid line on top of mounting base. Remove black "wall side" liner.

3. Position & Press Firmly
Position holder horizontally and press the entire holder firmly against surface for 30 seconds.
Caution: Place holder in accessible position for removal by ensuring tab can stretch at least 20cm downwards upon removal

4. For optimal holding strength
Remove holder by sliding it upwards to remove from mounting bases. Remove gently to avoid scratching the surfaces.

5. Press firmly
Use your palm to firmly press each of the mounting bases along the length of the strip for at least 30 seconds.
Note: If mounting in moist areas, especially on ceramic tile or glass, wait 24 hours to allow adhesive to bond before use.

6. Attach holder
Slide holder back onto mounting bases, pushing it all the way down until it snaps into place.

To remove:
1. Slide holder off bases
Hold holder lightly as shown and slide upwards to remove holder from bases

2. Remove strip
To prevent mounting base from snapping your fingers, hold the base lighly as shown, DO NOT press against base against wall. SLOWLY slide tab STRAIGHT DOWN AGAINST THE WALL stretching strip at least 20cm until mounting bases releases from the wall.
Note: NEVER pull strip out at an angle. Strip could break or damage surface.