Item Descriptions:

Ultra low noise boosting from 9V to 32V, STANDARD of clean booster.

Conventional distortion type effectors are forced to be directed to the "certain kind of sound" intended or imagined by the manufacturer.

As a result, trying to bring out individuality to sounds will take considerable time to select equipment such as guitar amp and effector, as well as guitar techniques.

New product Ex-pro 32 volt CLEAN BOOSTER is a completely new and yet legitimate effector made entirely different from the conventional booster.

It expresses 100% of all techniques and feelings of people who play distorted sounds, making it possible to create sounds full of originality only for those people.

· 32 V power supply: Although power supply is the usual effector AC adapter (DC 9 V), it is boosted to 32 V in the main body, realizing an amazing dynamic range and super low noise.

· Ultra low noise: 32 volt CLEAN BOOSTER can hardly feel noises even if the gain is maximized (residual noise - 105 dB JIS).

The noise component is that if you only have a noise noise if it is noisy, you can do it with gaming, but actually the effect on the guitar sound is not the ratio of the noise sound.

When the noise component is large, 1, the shortening of sustain time 2, the delay time of rise time 3 at picking, the roughness 4 of sound, the freshness of the sound etc. are remarkably deteriorated the guitar original sound.

The ultral low noise of 32 volt CLEAN BOOSTER is intended not to degrade the guitar sound as in 1, 2, 3, 4 above, rather than to reduce noise noise.

Furthermore, the noise also becomes an initiator to induce howling.

Of course, it is essentially different from the type that incorporates a noise suppressor with unnatural envelope change.

· Anti · howling: Even if a long sustain is obtained by sustainer or comp, it will inevitably become an unnatural envelope.

32 volt CLEAN BOOSTER gets natural natural long sustain of the guitar and will eventually shift to the feedback state, but there will be no howling (oscillation sound unrelated to string vibration) at that time (if the winding of the pickup is loose

There is also howling.)

· BFC control: Equipped with original BFC control which can not be obtained with equalizer (graphic, parameter) or ordinary tone control circuit.

There is little phase rotation, no noise increase, and it can be used as a treble booster, mid booster, bus booster, full range booster by combination of treble bus.

· IC not used: Usually it is outputted via a number of stages of IC (operational amplifier) ​​and diodes in effectors such as distortion, overdrive, booster etc. However, as the number of ICs increases, the real feeling like a simulator

It becomes a distant sound.

32 volt CLEAN BOOSTER realized a sound full of reality without losing the freshness of the sound, as it is a FET (field effect transistor) system which does not use one IC and a diode in the amplification circuit, and is a one-stage amplification circuit.

- Also suitable for base use: Bassists who are using this 32 volt are also seeking for sound lift and sound emphasis at fingering, slap.

People suffering from buried band ensemble, it should be the best pedal for bassist who outlines the sound and thinks of rhythm keeping.

· How to use: When using in conjunction with other effectors, it is basic to connect to the end of the effector (just before the amplifier), but devise so as to obtain the sound of your choice without worrying about connection order.

Although this unit is ultralow noise, if there is a lot of noise on the effecter connected before this unit, noise will be boosted as it is, so please be careful.

※ 32 Volt CLEAN BOOSTER does not come with an AC adapter, so please use the commercially available AC adapter (DC 9 V) for effectors.

■ Input Impedance: 1 MΩ

■ Output impedance: 2.5 kΩ or less

Boost amount: 26 dB (about 20 times)

■ Residual noise: -105 dB JIS

■ Control: Bus, treble, gain

■ Power supply voltage: DC 9V (AC adapter)

■ Current consumption: 40 mA (when LED is ON)

■ Dimension: 70 W × 49 H × 116 D mm

Weight ■: 300 g

Features:

• Please enter model number Confirm this is compatible:
• Ultra low noise with 9V → 32V boosting, STANDARD of clean booster
• BFC control
• Speaker impedance impedance: 4 to 16 Ω
• 40% (16 W) · 20% (4 W) · 5% (0.25 W) · 1% (0.01 W)
• Popular as a buffer

Product information:

Shipping Weight: 258 g

Package Dimensions: 5.84 x 8.38 x 13.21 cm