206,207 about 27 cm × 2.5 cm
307 about 22.5 cm × 2 cm
Car stickers Product Installation Caption:
First, the paste method with transparent transfer film small car stickers (dry paste method):
Tools: rags, scraper or credit card
1, clean body, keep dry.
2, to determine the location of a good need to paste. Under normal circumstances, the side stick slowly, while tools evenness, while Jiedi paper.
3, if the graphics really do not, but also the transparent transfer film and the sticker tear paste. But must be careful not an accident adhesion.
4, posted good, and then repeated scraping pressure several times. Off the transparent transfer film.
5, and sewn in the door with a knife draw knife, inward package obedient.
6, do not let the car stickers and body of any separation or protrusions.
Paste the second method, with a large car stickers transparent transfer film (wet paste method):
Tools: rags, watering containers, scraper or credit card
1, clean body, the body parts will be posted on a uniform sprinkler - to reduce the sticker viscosity, easy to adjust the position.
2, to determine the location of a good need to paste. The side stick slowly while gently tools evenness, while Jiedi paper.
3, door handles or anti-rub encounters the material to be cut and pack into under the circumstances.
4, appropriate adjustments to the graphics in general after determining the correct position, the force repeatedly scrape the water and bubbles. Off the transparent transfer film.
5, and sewn in the door with a knife draw knife, inward package obedient.
6, do not let the car stickers and body of any separation or protrusions.
7, try to make car stickers in the water dry, dry conditions can moderate heating. Depending on the weather situation, and then washing a day or two later. 
