The Best Microphone for 
Classic Instruments 
An affordable clip-on microphone perfectly for drum, wind and strings instruments.

Introducing A-T ATM350:
 Cardioid Condenser Clip-on Instrument Microphone




Supplied with Audio-Technica’s versatile UniMount® clip and new violin mount, the low-profile ATM350 is an exceptional cardioid condenser microphone designed to clip to brass, upright bass, reeds, piano, snare, toms, and violin. The microphone offers a crisp, clear, well-balanced response, even at high SPLs. It features an integral 80 Hz hi-pass filter on the in-line power module. Its cardioid polar pattern reduces pickup of sounds from the side and rear for effective protection against feedback.

  

 
Product Features 

 


TECHNICAL SPECIFICATION

ELEMENT Fixed-charge back plate permanently polarized condenser
POLAR PATTERN Cardioid
FREQUENCY RESPONSE 40-20,000 Hz
LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY –49 dB (3.5 mV) re 1V at 1 Pa
IMPEDANCE 50 ohms
MAXIMUM INPUT SOUND LEVEL 149 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical) 122 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 67 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS 11-52V DC, 3.5 mA typical
SWITCH Flat, roll-off
WEIGHT (MICROPHONE) 14.5 g (0.5 oz)
WEIGHT (POWER MODULE) 81.2 g (2.9 oz)
DIMENSIONS (MICROPHONE) 37.8 mm (1.49") long,
12.2 mm (0.48") diameter
DIMENSIONS (POWER MODULE) 92.9 mm (3.66") long,
18.9 mm (0.74") diameter
OUTPUT CONNECTOR (POWER MODULE) Integral 3-pin XLRM-type
CABLE 4.0 m (13.1') long (permanently attached to microphone), 3.2 mm (0.13") diameter, 2-conductor shielded cable with TA3F-type connector
ACCESSORIES FURNISHED AT8542 power module; AT8418 UniMount® microphone instrument mount; AT8468 violin mount; soft protective pouch
AUDIO-TECHNICA CASE STYLE M36

All our A-T ATM350 offers a 
1 year local warranty.