↑
ITEM 01

↑
ITEM 02

↑
ITEM 03

↑
ITEM 04

↑
ITEM 05

↑
ITEM 06

↑
ITEM 07

↑
ITEM 08

Step 01:

Step 01 Step 01:   Clean the surface with a dry cloth. Then mark the desired place

Step 02:

Step 02 Place the wall sticker on a plain table or hard surface then smooth out the backing paper using ID card/bank card or plastic squeegee, so that no bubble left.

Step 03:

Step 03 Stick the wall sticker on the desired place using masking tape

Step 04:

Step 04 Carefully remove the backing paper at the flat angel to ensure that the decal remains adhere to the application tape

Step 05:

Step 05 Cut half of the backing paper . Then affix the decal to the desired location with the adhesive side facing the surface

Step 06:

Step 06 Smooth out the application tape using plastic squeegee or card, make sure the sticker is properly applied to the surface

Step 07:

Step 07 repeat step 03 to 06 for the rest of the sticker.

Step 08:

Step 08 Carefully peel off the application tape from the upper right corner at the flat angle. Peel completely. If any part is not affixed to the wall properly, press them using the squeegee.

Step 09:

Step 09 Done! See your wall now.