Module parameters:

1 voltage: 3V~6V

2 current: !#!amp!*! lt; 10 ma

3 volume: X 15.24mm X 2mm 15.24mm

4 pad spacing: up and down 100mil (2.54mm) left and right 600mil (15.24mm)

5 measuring dimensions: acceleration: 3 d angular velocity 3 d attitude Angle: 3 d

6 range: acceleration: plus or minus 16 g angular velocity: + 2000 / s.

7 resolution: acceleration: 6.1e-5g angular velocity: 7.6e-3 degree /s.

8 stability: acceleration: 0.001g angular velocity of 0.02 degrees /s.

9 attitude measurement stability: 0.01 degrees.

10 the data output frequency 100Hz (115200 baud) /20Hz (baud rate 9600).

11 data interface: serial port. TTL levelI2C (direct connect MPU6050 no attitude output)

10 115200 KPS / 9600 baud rate KPS.

Product selling point:
1 internal module is integrated with the attitude solver with the dynamic Kalman filtering algorithm can under the dynamic environment accurate output module of current attitude attitude measurement accuracy is 0.01 degree high stability performance even better than some of the professional inclinometer.
2 USES the high precision gyro accelerometer MPU6050 reading MPU6050 measurement data from the processor and then through the serial port output removes the users themselves to develop MPU6050 complex of I2C protocol.
3 adopting the elaborate PCB layout and process to ensure the minimum MPU6050 received external interference measurement accuracy is the highest.

4 the module itself voltage stabilizing circuit the embedded system that can be compatible with 3.3 V / 5 V convenient connection.

5 module MPU6050 retained the I2C interface in order to meet the demand of the advanced users want access to the underlying data.

6 the use of advanced digital filtering technology can effectively reduce the measurement noise improve the measurement accuracy.

Using the stamp hole gold plating process quality assurance can be embedded in the user's PCB board.

Volume less than a 1 MAO coin size thickness 2 mm module stamp hole design can users to embed the modules in the circuit board.

Connection methods:

USBSerial port module connection6050The module squaremethodyes :USBA serial port of the module+5V TXD RXD GNDmeet6050 modelBlock TheVCC RX TX GNDPay attention toTXDandRXDThe cross.

The interface of computer and need to use TTL serial sugested using a mix of the two USB to serial port module of in order to avoid other brands of serial port module compatibility issues lead to 6050 module can not be normal output data delay your valuable time:

(1) multi function USB serial port module:

(2) USB to TTL module

Even the MCU microcontroller

MCUEven SCM and output debuging information.

Under normal circumstances MCUthestrand mouth Capitalsource thanrelativelytightZhang There areThe single slicemachineonly yesOneindividual strand mouth whileAnd adjustabletry ThewhenHouneed tothroughtoo strandmouthtransportAtransfertryletter interest thistime canwith take MCUThe TXPin connected toUSBturn stringmouth Module RXOn 6050dieblock theTXreceivedMCUTheRXPins soMCUCan be received6050Module data and can output debuging information.MCUUnable to output serial instruction6050Module but the configuration of the module can be saved and calibration can be automatically executed after power up third seconds usually do not send any instructions to work.

The communication between the monitoring module and the single chip microcomputer is used.

If you need toMCUaccept6050Module output data at the same time using a machine to monitor the current data can beUSBSerial port moduleRXReceiving moduleTXPin and common ground.

Exquisite big picture:

positive






Packaging Details
Unit Type: piece Package Weight: 0.060kg (0.13lb.) Package Size: 15cm x 14cm x 16cm (5.91in x 5.51in x 6.30in)