Usage: 1 the power cord plug into the home power outlet on the 2 to the sliding power switch、 this time from the spray button to see the blue light、 about 40 seconds after the release of steam. Body began to release steam may splash some water droplets、 this is normal 3 steam treatment use of steam in front of the face from the edge of the nozzle at least 20cm、 to ensure that cover the entire face steam shall let the steam alignment at the top of the chin boot about 40 seconds after steam spray、 mist and fog are the machines of the same kind、 the fastest water shortage、 the steam will change、 this is normal、 if the water in the water tank run out、 steam spraying opening will not be emitted steam、 please turn off the power switch、 and a cooling water tank for more than 10 minutes after the addition of water. Special note: if the machine is automatically shut down after the water bottle in the water、 temperature control device has been disconnected、 then add water machine can not work、 need to wait for 2 minutes or so thermostat in the ambient temperature can be reduced after the automatic reset to normal work. At this time normal、 does not mean that the machine has any fault. 4 turn down the power switch、 turn off the power supply. After the steam treatment、 the need for maintenance work、 if not timely care、 the skin will be dry.<br /><br />More face steamer or good items、 please click \