Features:
1. HW-398M is a 2.4 GHz wireless headset, specially designed for Xbox One, Xbox 360, PS4, PS3 and PC. Digital wireless technology allows you to operate the headset at a distance of up to 10 meters from the transmitter- allowing you freedom to move around without cable while playing games

2. You can hear both game and chat sounds through the headset because of special circuit design and built-in amplifier. Great noise cancellation and the headphones fit snugly over your ears so you can play games at reasonable volume without disturbing those nearby

3. Plug and play: fully support USB2.0, compatible USB1.0/1.1 interface. Good battery life, the headset can be used for about 15 hours after being fully charged

4. Microphone is detachable and adjustable. The microphone adopts digital signal input in all directions. The transmitter has built-in Microsoft approved non-driver USB sound card and adopts a pure-digit decoding system, which can reproduce the original real sounds

5. HW-399M is compatible for Xbox One without Kinect when connected by an Xbox one adapter. Please take off the cover of optical cable.

HW-398M is compatible for Xbox One without Kinect when connected by an Xbox one adapter (not included in package).

1) Must USE the optical cable to connect transmitter with console with cable protection cover removed and plug firmly with correct direction.

2) USE 40cm USB cable to connect transmitter with console, 80 cm USB cable for charging headset

1.Connect with PC:

Use USB cable to connect the transmitter and PC.

2.Connect with PS3/4/Xbox 360/Xbox One:

Use HDMI cable to connect console and TV;

Use optical cable to connect console and transmitter;

Use USB cable to connect transmitter and console.

3.Use 2.5-3.5mm cable to connect headset and controller of Xbox 360.

Use a fiber converter to connect Xbox 360 and 2.5-3.5mm cable if used on old version of Xbox 360.

4.Use Kinect as microphone or use 2.5-3.5mm cable to connect headset and Xbox One stereo headset adapter on controller if you want to use microphone on Xbox One.

Working voltage: 3.5-4.2V

Working current: 75 mA

Lithium battery: 1200 mAh

Working hours: 15h

Charging time: ≈5h

Frequency range: 2.400-2.483Ghz

Frequency space: 2 MHz

Transmit rate: 3 dB

Sampling frequency: 48 KHz

Modulate mode: GFSK

Receiving sensitivity: -85dB

SNR: 85 dB

Speaker size: Φ40mm

Speaker impedance: 32Ω

Frequency response: 20~20 KHz

Microphone sizes: Φ6.0*5mm

Microphone sensitivity: -58dB

Microphone direction: Omni directional

Microphone frequency response: 100Hz-8 KHz

1.Transmitter.............1PCS

2.Wireless headset....... 1PCS

3.3.5-2.5 cable............1PCS

4.USB-USB Micro cable..... 2PCS

5.Fibre-optical cable.........1PCS

6.Detachable Microphone..... 1PCS

7.Manual guide...............1PCS