Flow efficiency has been maximized by increasing the air pressure via chamber formed between fan and the heat-sink and distributing it equally throughout the entire heat sink.

Heat sink’s bumpy shape has shortened the air movement distance between the fan and the heat pipe, thus minimizing the efficiency level differences between the heat pipes and increasing the heat transferring function via speeding up the hot air flow.

The Slit fin optimized for movement reduces resistance of air flow and covers wider surface area for heat transfer, which allows maximized heat sink function.

By distributing the air that is derived from the fan and not the hot air from heat sink, it cools down the surroundings of motherboard and provides more stabilized system.

Direct Touch Heat-pipe (DTH) Base technology transfers the CPU’s heat directly to heat-pipes, there by minimizing heat resistance and maximizing cooling performance.

Shark Fin Blade Fan is optimized for air flow and therefore it drastically decreases the air turbulence that is caused when the fan is operating. It also minimizes the noise and vibration and increases the fan power.

The high performance super thermal grease ZM-STG2M maximizes heat transfer from the CPU to the base of CNPS8X Optima for intensified cooling performance.

Provides easy and simple installment directions even for beginners and uses multi-clip supporter for great compatibility.

FDC (Fluid Distribution Chamber) flow structure.

TAC (Turbulence Acceleration Convex) Fin.

MLS (Multi-layer Slit) Fin.

DTH (Direct Touch Heat-pipe) Bass.

100mm Shark Fin Blade Fan Applied.

ZM-STG2M provided.

Easy & Simple Installment.

Dimension : 110(L) x 81(W) x 148.5(H)mm

Weight : 375g

Material : Pure Aluminum

Fan Dimension : 100Ø x 25(H)mm

Bearing Type : Long Life Bearing

Speed : 1,200 ~ 2,100 ±10%

Noise Level : 18.2 ~ 30.0dBA ±10%

Speed Control : PWM (Pulse Width Modulation)

Connector : 4Pin

Input Voltage : 12V

Thermal Grease : ZM-STG2M