T-2D PTZ is TAROT company for GoPro Hero3 camera was developed， used in photographic film and entertainment， advertising and many other areas of model aircraft photography. Stable head structure allows the aircraft is flying at high speed state， still be able to precisely control the camera mounted GoPro Hero3 remain stable， so that the screen output to achieve the best model aircraft photographic effects.

For latest Software Download， please visit

http://www.tarot-rc.com/index.php?main_page=page!#!amp!*!id=14

If you plan to mount this gimbal to a Phantom， you need extra ground clearance with this Landing Skid Extension for DJI Phantom . You also need the Adapter Mounting Plate for Tarot T-2D Gimbal to DJI Phantom to mount your Tarot Gimbal to the Phantom. With this adapter plate， it takes just a few minutes to mount your gimbal， otherwise， you will have to drill holes on your Phantom， which does damage to your Phantom and takes much longer time.

Description:

Item Name: Camera Gimbal TL68A00

Working Voltage: DC 7.4V ~ 14.8V (Recommended 12V， three lithium battery)

Working Current: 200mA-500mA (power supply voltage and the motor related)

Working Environment Temperature: minus 15 degree ~ 65 degree

Processor: Dual 32-bit high-speed ARM core processor

Sensor: Three rotor MEMS gyroscope rotor MEMS accelerometers and the three

Maximum Angular Rate: 2000 degree / sec

Maximum Acceleration: 16g

Control Frequency: 2000Hz

Motor Drive Frequency: 20KHz (no noise smoothing driven)

Control Accuracy: 0.1 degree

Control Angle Range: -45 degree ~ 45 degree (roll)， -135 degree ~ 90 degree (tilt)

Pose Solver Algorithms: PTZ dedicated brushless motor decoupled EKF algorithm

Shooting Equipment: GOPRO Hero compatible

Support Remote Devices: PPM/PCM/2.4G

Support Receiver: conventional receiver， S-BUS receiver， DSM2/DSMJ/DSMX receiver

Weight:195g

Features:

Support GOPRO Hero3 video auxiliary output

Support the supply voltage polarity protection and voltage compensation

Support the motor drive end short-circuit protection

Support for custom initial pitch angle

Support sensitivity parameter adjustment and software 3D pose show

The support rocker rate mode and position mode

Related Spare Part :

Head hanging hook TL68A01

GOPRO camera fasteners TL68A02

GOPRO brushless PTZ camera frame assembly TL68A03

GOPRO head roll arm TL68A04

GOPRO PTZ stand arm motor base TL68A05

GOPRO brushless motor TL68A06 PTZ

GOPRO two axes PTZ shock group TL68A07

GOPRO brushless pan rack assembly TL68A08

GOPRO head roll axis brushless motor TL8A09

GOPRO AV video output cable TL68A10

GOPRO PTZ suspension ball TL68A11

GOPRO two-axis gyroscope ZYX22 PTZ

Package Included:

1 x Camera Mount

1 x board

2 x motor

1 x gyro

1 x wire set

1 x screw set

Notes: Gopro 3 is not included!