Feature：

High performance
necessity for life
Brand new and high quality.
Convenient and easy to use.
Look no further, buy it now!

Item Description：

1. Measurement accuracy: 1% plus or minus 2 bytes.
2. Display: 0.5 inch LED Nixie tube (voltage red display, current green display).
3. Measurement range: alternating voltage: AC80-300V.
4. Alternating current: AC 0.2-99.9A
5. Power consumption: less than 0.2VA
6. Measurement speed: about 2 times per second.
7. External size: 54 x 80 x 64 mm (Length x Width/Height x Thickness).
8. Installation width: =3P (DZ47/C45, air switch position).
9. Installation method: guide rail type (market general guide). Note: it is not included in package.
10. Wire to measure circuit thread through round hole on right of voltmeter. (Hole diameter 11mm, can thread through standard copper wire of 12 square millimeter at most. Can load 100A at most.
Use and connection method:
1. Connect voltage to be measured to 1 and 2 cable port on lower left corner of voltmeter.
2. When measurement current is more than 99.9A, please connect external mutual inductor as picture 1. Connect secondary port of current mutual inductor to 3 and 4 wire port on top left of voltmeter.
4. When measurement current is from 0.2 to 99.9A, please connect built-in mutual inductor as picture 2. Thread wire to measure circuit through round hole on right. The direction is chosen acording to your need. You can thread through round hole below voltmeter or over it. And measurement results will be different.

Package Content：

1 x Voltmeter
1 x English wiring diagram